2001. -

Doktorat tehničkih znanosti

Doktorski studij

Tehnički fakultet Sveučilišta u Rijeci

1986. - 1990.

Magistar tehničkih znanosti

Poslijediplomski studij

Tehnički fakultet Sveučilišta u Rijeci

1978. - 1983.

Diplomirani inženjer strojarstva

Diplomski sveučilišni studij strojarstva

Tehnički fakultet Sveučilišta u Rijeci

29.04.2016. -

Redoviti profesor u trajnom zvanju

Održavanje nastave. Rad na znanstveno - istraživačkim projektima.

Tehnički fakultet Sveučilišta u Rijeci

26.11.2010. - 29.04.2016.

Redoviti profesor

Održavanje nastave. Rad na znanstveno - istraživačkim projektima.

Tehnički fakultet Sveučilišta u Rijeci

2006. - 26.11.2010.

Izvanredni profesor

Održavanje nastave. Rad na znanstveno - istraživačkim projektima.

Tehnički fakultet Sveučilišta u Rijeci

2001. - 2006.

Docent

Održavanje nastave. Rad na znanstveno - istraživačkim projektima.

Tehnički fakultet Sveučilišta u Rijeci

2001. -

Viši asistent

Održavanje nastave. Rad na znanstveno - istraživačkim projektima.

Tehnički fakultet Sveučilišta u Rijeci

1994. - 2001.

Asistent

Izvođenje vježbi. Rad na znanstveno - istraživačkim projektima.

Tehnički fakultet Sveučilišta u Rijeci

1990. - 1994.

Projektant strojeva

Projektiranje specijalnih alatnih strojeva

Tvornica specijalnih alatnih strojeva SAS Zadar

1987. - 1990.

stručni suradnik

Razvoj software-a za elemente strojeva. Rad na znanstveno - istraživačkim projektima.

Tehnički fakultet Sveučilišta u Rijeci

1985. - 1987.

inženjer u servisu motora i dizalica

Vođenje poslova servisiranja i popravka brodskih motora i dizalica

Brodogradilište "3.maj" u Rijeci

2013. -

Tehnički odbor TO 530 - Čelična užad, lanci, dizalične kuke, trake, omče i pribor, Hrvatski zavod za norme.

2008. -

Tehnički odbor TO 529 - Granici, dizalice i prenosila neprekidne dobave, Hrvatski zavod za norme.

2005. - 2006.

Njemačko udruženje inženjera VDI

2002. -

Hrvatsko društvo za elemente strojeva i konstruiranje

2002. -

Akademski klub doktora znanosti, magistara znanosti, diplomiranih inženjera i inženjera Tehničkog fakulteta Sveučilišta u Rijeci

2014.

Prilog istraživanju nosivosti unutarnjeg evolventnog ozubljenja s velikim stupnjem prekrivanja profila( A Contribution to the Research of the Loading Capacity of Internal Involute High Contact Ratio Gears )

2001.

Analiza nosivosti evolventnog ozubljenja s velikim prekrivanjem profila( Load Capacity Analysis of the High Contact Ratio Involute Gearing )

Nosivost evolventnog ozubljenja s velikim prekrivanjem profila( Load Capacity of the Involute Gear with a Large Transverse Contact Ratio )

Lovrin, Neven

4. skup KONSTRUIRANJE 96, Zbornik radova / Križan, Božidar (ur.). - Rijeka : Tehnički fakultet Sveučilišta u Rijeci , 1996. 134-140 (ISBN: 953-6326-06-X).

On Tribological Properties of HCR-Gears

Križan, Božidar; Lovrin, Neven

Tribologia, Teorija i praktyka / Pytko, Stanislaw (ur.). - Warszawa : Polskie towarzystwo tribologiczne , 1998. 728-739.

Photoelastic investigation of tooth root stresses in HCR-gears

Lovrin, Neven; Križan, Božidar

17th DANUBIA-ADRIA SYMPOSIUM ON EXPERIMENTAL METHODS IN SOLID MECHANICS / Holy, Stanislav ; Maštovsky, Jiri ; Vitek, Karel (ur.). - Praha : Czech Technical University of Prague , 2000. 195-198.

Selection of the Two–Carrier Shifting Planetary Gear Train Controlled by Clutches and Brakes

Troha, Sanjin; Lovrin, Neven; Milovančević, Miloš

Transactions of FAMENA (1333-1124) 3 (2012), 36; 1-12

Analysis of the Hertzian stress in High Transverse Contact Ratio Involute Gearing

Križan, Božidar; Lovrin, Neven

The Tenth International Conference on Machine Design and Production, umtik 2002 / Erden, Abdulkadir ; Akkok, Metin ; Kilic, Engin S. (ur.). - Cappadocia :

Load Capacity of the Tooth Root in Internal High Transverse Contact Ratio Involute Gearing

Križan, Božidar; Lovrin, Neven; Franulović, Marina

The 17th International Conference on Production Research, Electronic Proceedings / Deisenroth, Michael P. (ur.). - Blacksburg, Virginia, USA : Virginia Polytechnic Institute and State University , 2003. .

The Influence of Quality Grade and Loading on Load Distribution on Gears

Franulović, Marina; Križan, Božidar; Lovrin, Neven

microCAD 2004, International Scientific Conference, Machine and Construction Design / Lehoczky, Laszlo ; Kalmar, Laszlo (ur.). - Miskolc : Miskolci Egyetem Innovacios es Technologia Transzfer Centruma , 2004. 25-29.

Some considerations about the HCR gear's load distribution calculation

Lovrin, Neven; Križan, Božidar; Basan Robert;

48th International Conference of Machine Elements and Mechanisms Departments 2007 / Bošansky, Miroslav ; Koša, Radoslav ; (ur.). - Bratislava : Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering , 2007. 159-166 (ISBN: 978-80-227-2708-2).

2008

Role of Ethics in Engineering Design

Lovrin, Neven; Vrcan, Željko;

XII International Conference on Mechanical Engineering 2008

ENGINEERING ETHICS FOR THE 21ST CENTURY

Lovrin, Neven; Vrcan, Željko;

3rd International Scientific Conference Management of Technology Step to Sustainable Production MOTSP 2011 Conference Proceedings

On the Responsibility and Dignity of Engineering Profession

Lovrin, Neven; Vrcan, Željko; Uršić, Vanja;

4th International Scientific Conference Management of Technology Step to Sustainable Production MOTSP 2012 Conference Proceedings

An Analysis of the Loading Capacity of Internal High Contact Ratio Gears

Vrcan, Željko; Lovrin, Neven;

12th International Conference on Advanced Engineering, Computer Aided Design and Manufacturing CADAM 2014 Proceedings

The Influence of Engineering Ethics on Ecology and Sustainable Development

Lovrin, Neven; Vrcan, Željko

6th International Scientific Conference Management of Technology – Step to Sustainable Production Conference Proceedings / Ćosić, Predrag ; Barić, Gordana ; Đukić, Goran (ur.). - Zagreb : Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb , 2014. .

Ethical Questioning Of Using Modern Economic Slavery In Contemporary Industrial Production

Lovrin, Neven; Vrcan, Željko;

7th International Scientific Conference Management of Technology–Step to Sustainable Production Conference Proceedings

2009

Primjene stroboskopa

Vrcan, Željko; Lovrin, Neven; Gregov, Goran;

Engineering Review: Međunarodni časopis namijenjen publiciranju originalnih istraživanja s aspekta analize konstrukcija, materijala i novih tehnologija u području strojarstva, brodogradnje, temeljnih tehničkih znanosti, elektrotehnike, računarstva i građevinarstva - 29

Suvremeni pristup konstrukciji zupčanika pomoću računala( Modern Approach to the Computer Aided Gear Design )

Murljačić, Ivo; Lovrin, Neven

Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici (1330-9587) 25 (2005); 13-20

2009

Neka razmatranja o nosivosti unutarnjeg evolventnog ozubljenja s velikim stupnjem prekrivanja profila

Lovrin, Neven; Franulović, Marina; Vrcan, Željko;

Engineering Review: Međunarodni časopis namijenjen publiciranju originalnih istraživanja s aspekta analize konstrukcija, materijala i novih tehnologija u području strojarstva, brodogradnje, temeljnih tehničkih znanosti, elektrotehnike, računarstva i građevinarstva - 29

Genetic algorithm based optimisation of conveyor belt material cross section area

Vrcan, Željko; Lovrin, Neven

Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku (1330-3651) 17 (2010), 2; 137-143

The Influence of Engineering Ethics on Ecology and Sustainable Development

Lovrin, Neven; Vrcan, Željko

ACTA TECHNICA CORVINIENSIS – Bulletin of Engineering (2067-3809) 8 (2015), 1; 109-114

Some Considerations About Engineering Ethics

Lovrin, Neven; Vrcan, Željko

Strojarstvo (0562-1887) 51 (2009), 3; 239-248

Utjecaj normalnog kuta zahvata na naprezanje u korijenu kod evolventnog ozubljenja s velikim stupnjem prekrivanja profila

Lovrin, Neven; Križan, Božidar

RIM 2001 - 3rd International Conference on Revitalization and Modernization of Production / Jurković, Milan; Karabegović, Isak (ur.). - Bihać : University of Bihać, Faculty of Technical Engineering Bihać , 2001. 153-156.

The Influence of the Normal Pressure Angle on the Hertzian Stress in HCR Involute Gearing

Lovrin, Neven; Križan, Božidar

Sbornik referatu, Časti a mechanismy stroju / Hrudičkova, Milena (ur.). - Ostrava :

A Contribution to the Optimal Choice of the HCR-Gears Regarding Frictional Losses

Križan, Božidar; Basan, Robert; Lovrin, Neven

International journal of applied mechanics and engineering (1734-4492) 7 (2002); 249-254

Photoelastic investigation into stresses in high transverse contact ratio gears

Lovrin, Neven; Križan, Božidar; Vrcan, Željko

Transactions of FAMENA (1333-1124) 33 (2009), 4; 31-40

Analysis of the Tooth Root Stress in High Transverse Contact Ratio Involute Gearing

Lovrin, Neven; Križan, Božidar

Proceedings of the Design 2002, 7th International Design Conference / Marjanović, Dorian (ur.). - Zagreb : Faculty of Mechanical Engineering and Naval Architecture , 2002. 1073-1078.

Importance of Engineering Ethics in Engineering Education

Lovrin, Neven

Zbornik radova međunarodne stručne konferencije ME4CataLOgue / Kozak, D. ; Barle, J. ; Markučič, D. ; Pavletić, D. ; Matičević, G. ; Vranešević, M. N. ; Rosandić, Ž. ; Damjanović, D. (ur.). - Slavonski Brod : Strojarski fakultet u Slavonskom Brodu , 2014. 199-202 (ISBN: 978-953-6048-76-2).

2009

Importance of Ethics In Engineering Design

Lovrin, Neven; Vrcan, Željko; Štanfelj, Marko;

International Scientific Conference Management of technology Step to Sustainable Production, MOTSP 2009. Conference Proceedings

Design Proposal of a Hydrostatic City Bus Transmission

Vrcan, Željko; Siminiati, Dubravka; Lovrin, Neven

Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici (1330-9587) 31 (2011), 2; 81-89

Photoelastic research of the Hertzian stress in HCR-gears

Lovrin, Neven; Križan, Božidar; Franulović, Marina

PROCEEDINGS OF THE DESIGN 2004, 8th INTERNATIONAL DESIGN CONFERENCE / Marjanović, Dorian (ur.). - Zagreb : Faculty of Mechanical Engineering and Naval Architecture , 2004. 1309-1314.

Some considerations about the load capacity and efficiency of the HCR-gears

Križan, Božidar; Lovrin, Neven

4th World Congress on Gearing and Power Transmission / Manifestations et Communications Internationales (ur.). - Paris : IET, CETIM , 1999. 329-334.

Determination of Optimal Tooth Height in High Transverse Contact Ratio Involute Gearing

Lovrin, Neven; Križan, Božidar

Trends in the Development of Machinery and Associated Technology, TMT 2002, Proceedings / Brdarević, Safet ; Ekenović, Sabahudin ; Pascual, Ramon C. ; Calvet, Joan V. (ur.). - Neum : Faculty of Mechanical Engineering in Zenica , 2002. 437-440.

Research of the Hertzian Stress in Internal High Transverse Contact Ratio Involute Gearing

Lovrin, Neven; Franulović, Marina; Križan, Božidar

SBORNIK REFERATU XLIV. KONFERENCE KATEDER ČASTI A MECHANISMU STROJU S MEZINARODNI UČASTI / Jančik, Ludek ; Houkal, Jiri (ur.). - Praha : Ustav vyrobnich stroju a mechanismu ČVUT Praha , 2003. 170-173.

Load Distribution on Spur Involute Gears with Pitch Errors

Franulović, Marina; Križan, Božidar; Lovrin, Neven

Fakulta strojni ustav vyrobnich stroju a mechanismu odbor časti a mechanismu stroju, Sbornik referatu / Bečka, Jan ; Pospichal, Jaroslav (ur.). - Praha : Fakulta strojni ustav vyrobnich stroju a mechanismu odbor časti a mechanismu stroju , 2003. 58-61.

The Influence of Quality Grade and Loading on Load Sharing on HCR Gears

Franulović, Marina; Križan, Božidar; Lovrin, Neven

The Eleventh International Conference on Machine Design and Production, Conference Proceedings / Akkok, Metin ; Erden, Abdulkadir ; Kilic, Engin S. ; Konukseven, Ilhan ; Tonuk, Ergin (ur.). - Antalya : Middle East Technical University, Ankara , 2004. .

Influence of Pitch Errors on Load Distribution on Spur Involute HCR Gears Teeth

Franulović, Marina; Križan, Božidar; Lovrin, Neven

Proceedings of the Design 2004, 8th International Design Conference / Marjanović, Dorian (ur.). - Dubrovnik : Faculty of Mechanical Engineering and Naval Architecture, The Design Society , 2004. 1251-1256.

A Contribution to The Analytical Determination of Tooth Root Stresses in High Transverse Contact Ratio Gears

Basan, Robert; Lovrin, Neven; Križan, Božidar

The Eleventh International Conference on Machine Design and Production, Conference Proceedings / Akkok, Metin ; Erden, Abdulkadir ; Kilic, Engin S. ; Konukseven, Ilhan ; Tonuk, Ergin (ur.). - Antalya : Middle East Technical University, Ankara , 2004. .

A contribution to the determination of the hertzian stress in high transverse contact ratio gears

Lovrin, Neven; Križan, Božidar; Basan, Robert

International Conference on Gears : Proceedings / Hoehn, Bernd-Robert (ur.). - Duesseldorf : VDI Verlag GmbH , 2005. 1761-1765 (ISBN: 3-18-091904-3).

A New Proposal for the Calculation of the HCR-Gears Load Capacity

Lovrin, Neven; Križan, Božidar

Annals of DAAAM FOR 2005 & PROCEEDINGS OF THE 16TH INTERNATIONAL DAAAM SYMPOSIUM / Katalinić, Branko (ur.). - Vienna : DAAAM Intrenational Vienna , 2005. 229-230 (ISBN: 3-901509-46-1).

Influence of HCR-Gears Geometric Parameters on Their Load Carrying Capacity and Frictional Losses

Basan, Robert; Franulović, Marina; Lovrin, Neven

Proceedings of Papers of 48th International Conference of Machine Elements and Mechanisms Departments / Bošansky, M ; Koša, R. (ur.). - Bratislava : Slovak University of Technology , 2007. 7-14 (ISBN: 978-80-227-2708-2).

Some considerations on the application of Wolfrom planetary gear trains

Vrcan, Željko; Lovrin, Neven; Mrzljak, Vedran

XII International Conference on Mechanical Engineering Proceedings 2008 / Starek, L. ; Hučko, B. (ur.). - Bratislava : Slovak University of Technology , 2008. III-39-III-41 (ISBN: 978-80-227-2982-6).

Energy Saving in Modern Gearboxes using HCR Gears

Lovrin, Neven; Vrcan, Željko;

MOTSP 2010 International Scientific Conference-Management of Technology–Step to Sustainable Production, Conference Proceedings

Some Considerations on the Geometry of High Transverse Contact Ratio Internal Involute Gears

Vrcan, Željko; Lovrin, Neven; Križan, Božidar;

IN‐TECH 2011 Proceedings of International Conference on Innovative Technologies

A Contribution to the Calculation of the Loading Capacity of Internal High Contact Ratio Gears

Vrcan, Željko; Lovrin, Neven; Križan, Božidar

Proceedings - The Seventh International Symposium "KOD 2012" / Kuzmanović, Siniša ; Vereš, Miroslav (ur.). - Novi Sad : Faculty of Technical Sciences, Novi Sad, Serbia , 2012. 309-316 (ISBN: 978-86-7892-399-9).

Some Ethical Aspects of Cheap Products Made In China

Lovrin, Neven; Vrcan, Željko;

5th International Scientific Conference Management of Technology–Step to Sustainable Production Proceedings

O povijesti trakastih transportera( About the History of Belt Conveyors )

Lovrin, Neven; Debelić, Dražen

Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici (1330-9587) 28 (2008), 2; 111-118

Volume and mass comparison of two-stage coaxial reduction gears with single-stage and two-stage planetary reduction gears

Gregov, Goran; Lovrin, Neven; Vrcan, Željko

Transactions of FAMENA (1333-1124) 34 (2010), 1; 59-70

On Tribological Properties of HCR-Gears

Križan, Božidar; Lovrin, Neven

TRIBOLOGIA - Teoria i praktyka (0208-7774) XXIX (1998), 5; 728-739

Load Capacity of the HCR-Spur Gears in Comparison with Standard Spur Gears

Lovrin, Neven; Križan, Božidar

Proceedings of the 5th International Design Conference DESIGN 98 / Marjanović, Dorian (ur.). - Zagreb : FSB, WDK, CTT , 1998. 751-754.

Modern Approach to the Computer Aided Gear Design

Murljačić, Ivo; Lovrin, Neven

Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici (1330-9587) 25 (2005); 13-20

2009

Some considerations about engineering ethics

Lovrin, Neven; Vrcan, Željko;

Strojarstvo: časopis za teoriju i praksu u strojarstvu - 51

O povijesti trakastih transportera( About the History of Belt Conveyors )

Lovrin, Neven; Debelić, Dražen

Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici (1330-9587) 28 (2008), 2; 111-118

On Tribological Properties of HCR-Gears

Križan, Božidar; Lovrin, Neven

TRIBOLOGIA - Teoria i praktyka (0208-7774) XXIX (1998), 5; 728-739

Photoelastic investigation into stresses in high transverse contact ratio gears

Lovrin, Neven; Križan, Božidar; Vrcan, Željko

Transactions of FAMENA (1333-1124) 33 (2009), 4; 31-40

2009

SOME CONSIDERATIONS ON THE LOAD CAPACITY OF INTERNAL HIGH TRANSVERSE CONTACT RATIO INVOLUTE GEARING

Lovrin, Neven; Franulović, Marina; Vrcan, Željko;

Engineering Review: Međunarodni časopis namijenjen publiciranju originalnih istraživanja s aspekta analize konstrukcija, materijala i novih tehnologija u području strojarstva, brodogradnje, temeljnih tehničkih znanosti, elektrotehnike, računarstva i građevinarstva - 29

2009

Applications of stroboscopes

Vrcan, Željko; Lovrin, Neven; Gregov, Goran;

Engineering Review: Međunarodni časopis namijenjen publiciranju originalnih istraživanja s aspekta analize konstrukcija, materijala i novih tehnologija u području strojarstva, brodogradnje, temeljnih tehničkih znanosti, elektrotehnike, računarstva i građevinarstva - 29

Volume and mass comparison of two-stage coaxial reduction gears with single-stage and two-stage planetary reduction gears

Gregov, Goran; Lovrin, Neven; Vrcan, Željko

Transactions of FAMENA (1333-1124) 34 (2010), 1; 59-70

2010

Genetic algorithm based optimisation of conveyor belt material cross section area

Vrcan, Željko; Lovrin, Neven;

Tehnički vjesnik - 17

Design Proposal of a Hydrostatic City Bus Transmission

Vrcan, Željko; Siminiati, Dubravka; Lovrin, Neven

Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici (1330-9587) 31 (2011), 2; 81-89

Selection of the Two–Carrier Shifting Planetary Gear Train Controlled by Clutches and Brakes

Troha, Sanjin; Lovrin, Neven; Milovančević, Miloš

Transactions of FAMENA (1333-1124) 3 (2012), 36; 1-12

16-20.09.2014.

Some Ethical Aspects of Engineering Profession // 12th International Conference on Advanced Engineering, Computer Aided Design and Manufacturing CADAM 2014 Proceedings / Obsieger, Boris (ur.). Rijeka : Redak, 2014. 31-34 (pozvano predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

Lovrin, Neven

Vodice, Hrvatska

2013.

Some Ethical Aspects of Cheap Products Made In China

Lovrin, Neven; Vrcan, Željko

Predavanje

5th International Scientific Conference Management of Technology – Step to Sustainable Production Novi Vinodolski, Hrvatska

2012.

On the Responsibility and Dignity of Engineering Profession

Lovrin, Neven; Vrcan, Željko; Uršić, Vanja

Predavanje

4th International Scientific Conference Management of Technology Step to Sustainable Production MOTSP 2012 Zadar, Hrvatska

2012.

A Contribution to the Calculation of the Loading Capacity of Internal High Contact Ratio Gears

Vrcan, Željko; Lovrin, Neven; Križan, Božidar

Predavanje

The Seventh International Symposium Machine and Industrial Design in Mechanical Engineering "KOD 2012" Balatonfüred, Mađarska

2011.

Some Considerations on the Geometry of High Transverse Contact Ratio Internal Involute Gears

Vrcan, Željko; Lovrin, Neven; Križan, Božidar

Predavanje

International Conference on Innovative Technologies IN-TECH 2011 Slovačka Republika, Bratislava

2011.

ENGINEERING ETHICS FOR THE 21ST CENTURY

Lovrin, Neven; Vrcan, Željko

Predavanje

3rd International Scientific Conference Management of Technology Step to Sustainable Production MOTSP 2011 Bol na Braču, Hrvatska

2010.

Energy Saving in Modern Gearboxes using HCR Gears

Lovrin, Neven; Vrcan, Željko

Predavanje

MOTSP 2010 International Scientific Conference - Management of Technology – Step to Sustainable Production Rovinj, Hrvatska

2009.

Importance of Ethics In Engineering Design

Lovrin, Neven; Vrcan, Željko; Štanfelj, Marko

Predavanje

International Scientific Conference Management of technology Step to Sustainable Production, MOTSP 2009. Šibenik, Republika Hrvatska

2008.

Role of Ethics in Engineering Design

Lovrin, Neven; Vrcan, Željko

Predavanje

XII International Conference on Mechanical Engineering 2008 Bratislava, Slovačka

2008.

Some considerations on the application of Wolfrom planetary gear trains

Vrcan, Željko; Lovrin, Neven; Mrzljak, Vedran

Predavanje

XII International Conference on Mechanical Engineering 2008 Bratislava, Slovačka

12.09.2007.

Some considerations about the HCR gear's load distribution calculation

Lovrin, Neven; Križan, Božidar; Basan Robert;

Predavanje

48th International Conference of Machine Elements and Mechanisms Departments 2007 Smolenice, Slovačka

2007.

Influence of HCR-Gears Geometric Parameters on Their Load Carrying Capacity and Frictional Losses

Basan, Robert; Franulović, Marina; Lovrin, Neven

Predavanje

Proceedings of Papers of 48th International Conference of Machine Elements and Mechanisms Departments Smolenice, Slovačka

14.09.2005.

A contribution to the determination of the hertzian stress in high transverse contact ratio gears

Lovrin, Neven; Križan, Božidar; Basan, Robert

Predavanje

International Conference on Gears Muenchen, Njemačka

2005.

A New Proposal for the Calculation of the HCR-Gears Load Capacity

Lovrin, Neven; Križan, Božidar

Predavanje

16th International DAAAM Symposium Opatija, Hrvatska

2004.

The Influence of Quality Grade and Loading on Load Distribution on Gears

Franulović, Marina; Križan, Božidar; Lovrin, Neven

Predavanje

microCAD 2004, International Scientific Conference, Machine and Construction Design Miškolc, Mađarska

2004.

Photoelastic research of the Hertzian stress in HCR-gears

Lovrin, Neven; Križan, Božidar; Franulović, Marina

Predavanje

8th International Design Conference, DESIGN 2004 Cavtat, Hrvatska

2004.

The Influence of Quality Grade and Loading on Load Sharing on HCR Gears

Franulović, Marina; Križan, Božidar; Lovrin, Neven

Predavanje

11th International Conference on Machine Design and Production Antalya, Turska

2004.

A Contribution to The Analytical Determination of Tooth Root Stresses in High Transverse Contact Ratio Gears

Basan, Robert; Lovrin, Neven; Križan, Božidar

Predavanje

11th International Conference on Machine Design and Production Antalya, Turska

2004.

Influence of Pitch Errors on Load Distribution on Spur Involute HCR Gears Teeth

Franulović, Marina; Križan, Božidar; Lovrin, Neven

Predavanje

8th International Design Conference, DESIGN 2004 Cavtat, Hrvatska

09.09.2003.

Research of the Hertzian Stress in Internal High Transverse Contact Ratio Involute Gearing

Lovrin, Neven; Franulović, Marina; Križan, Božidar

Predavanje

XLIV. Konference kateder časti a mehnaismu stroju s mezinarodni učasti Prag, Češka Republika

2003.

Load Capacity of the Tooth Root in Internal High Transverse Contact Ratio Involute Gearing

Križan, Božidar; Lovrin, Neven; Franulović, Marina

Predavanje

The 17th International Conference on Production Research Enterprise Integration Blacksburg, Virginia, Sjedenjene Američke Države

2003.

Load Distribution on Spur Involute Gears with Pitch Errors

Franulović, Marina; Križan, Božidar; Lovrin, Neven

Predavanje

XLIV. Konference kateder časti a mehnaismu stroju s mezinarodni učasti Prag, Češka Republika

2002.

Determination of Optimal Tooth Height in High Transverse Contact Ratio Involute Gearing

Lovrin, Neven; Križan, Božidar

Predavanje

6th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2002 Neum, Bosna i Hercegovina

2002.

Analysis of the Tooth Root Stress in High Transverse Contact Ratio Involute Gearing

Lovrin, Neven; Križan, Božidar

Predavanje

7th International Design Conference Design 2002 Dubrovnik, Hrvatska

2002.

Analysis of the Hertzian stress in High Transverse Contact Ratio Involute Gearing

Križan, Božidar; Lovrin, Neven

Predavanje

The Tenth International Conference on Machine Design and Production Cappadocia, Turska

2001.

Utjecaj normalnog kuta zahvata na naprezanje u korijenu kod evolventnog ozubljenja s velikim stupnjem prekrivanja profila

Lovrin, Neven; Križan, Božidar

Poster

RIM 2001 - Revitalization and Modernization of Production, 3rd International Symposium Bihać : University of Bihać, Faculty of Technical Engineering Bihać

2001.

The Influence of the Normal Pressure Angle on the Hertzian Stress in HCR Involute Gearing

Lovrin, Neven; Križan, Božidar

Predavanje

XLII. Mezinarodni konference kateder časti stroju a mechanismu Ostrava, Češka Republika

2000.

Photoelastic investigation of tooth root stresses in HCR-gears

Lovrin, Neven; Križan, Božidar

Predavanje

17th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics Prag, Češka Republika

1999.

Some considerations about the load capacity and efficiency of the HCR-gears

Križan, Božidar; Lovrin, Neven

Poster

4th World Cogress on Gearing and Power Transmission Pariz, Francuska

1998.

On Tribological Properties of HCR-Gears

Križan, Božidar; Lovrin, Neven

Predavanje

5th International Symposium INSYCONT '98 Krakov, Poljska

1998.

Load Capacity of the HCR-Spur Gears in Comparison with Standard Spur Gears

Lovrin, Neven; Križan, Božidar

Predavanje

5th Int. Design Conference DESIGN 98 Dubrovnik, Hrvatska

16.05.1996.

Nosivost evolventnog ozubljenja s velikim prekrivanjem profila (Load Capacity of the Involute Gear with a Large Transverse Contact Ratio)

Lovrin, Neven

Predavanje

4. skup KONSTRUIRANJE 96 Opatija, Hrvatska

- 2011.

Analiza varijanti mjenjačkoga zupčaničkoga planetnog pretvarača

Sanjin Troha Doktorat

Poslijediplomski doktorski studij iz tehničkih znanosti

Datum obrane: 13.6.2011.

2007. - 2014.

Prilog istraživanju nosivosti unutarnjeg evolventnog ozubljenja s velikim stupnjem prekrivanja profila

Vrcan Željko Doktorat

Poslijediplomski doktorski studij iz tehničkih znanosti

Datum obrane: 20. 5. 2014.

2012. -

International Conference on Industrial Logistics ICIL 2012

Zadar Član Organizacijskog odbora

1996. -

4. skup KONSTRUIRANJE 96

Opatija Član Organizacijskog odbora

2010. -

Engineering Review, Tehnički fakultet Sveučilišta u Rijeci.

2010. -

Predstojnik Zavoda za konstruiranje u strojarstvu

Tehnički fakultet Sveučilišta u Rijeci

2010. -

Član povjerenstva za nastavu

Tehnički fakultet Sveučilišta u Rijeci

2007. - 2013.

Materijali, trajnost i nosivost suvremenih zupčastih prijenosnika

Suradnik

MZOS

2002. - 2006.

Istraživanje visokoopteretivih suvremenih zupčastih prijenosnika

Suradnik

MZOS

2001. - 2003.

Utjecaj krutosti nosivih konstrukcija na nosivost ozubljenja s velikim stupnjem prekrivanja profila

Suradnik

MZOS

1997. - 2001.

Zupčani prijenosnici s velikim stupnjem prekrivanja profila

Suradnik

MZOS

1987. - 1991.

Razvoj softwarea za elemente strojeva - Programski paket GearPac CX 3.5 za proračun cilindričnih evolventnih zupčanika

Suradnik

MZOS