Portfolio
Assoc. Prof. D. Sc.
Jelena Srnec Novak
mag. ing. mech
Faculty of Engineering
Contact
Visibility
Research
Journal Articles
2023.
Strain-controlled fatigue loading of an additively manufactured AISI 316L steel: Cyclic plasticity model and strain–life curve with a comparison to the wrought material
Marco Pelegatti, Denis Benasciutti, Francesco De Bona, Alex Lanzutti, Jelena Srnec Novak, Enrico Salvati
Fatigue and Fracture of Engineering Materials and Structures - 1-17
https://onlinelibrary.wiley.com/doi/full/10.1111/ffe.13992
Q1
2022.
On the factors influencing the elastoplastic cyclic response and low cycle fatigue failure of AISI 316L steel produced by laser-powder bed fusion
Pelegatti, Marco ; Benasciutti, Denis ; De Bona, Francesco ; Lanzutti, Alex ; Magnan, Michele ; Srnec Novak, Jelena ; Salvati, Enrico ; Sordetti, Francesco ; Sortino, Marco ; Totis, Giovanni ; Vaglio, Emanuele
International Journal of Fatigue - 165 1-12
https://www.sciencedirect.com/science/article/abs/pii/S0142112322004753
Q1 WOS Exc
2022.
Cyclic Plasticity and Low-Cycle Fatigue of an AISI 316L Stainless Steel Tested at Room Temperature
Benasciutti, Denis ; Pelegatti, Marco;Lanzutti, Alex ; Salvati, Enrico; Srnec Novak, Jelena ; De Bona, Francesco
Structural Integrity - 24 359-365
https://link.springer.com/chapter/10.1007/978-3-030-97822-8_42
2022.
Distortion after solubilization treatment of X12CrNiMoV12-3 beam-like samples: A novel FE modelling technique supported by experiments
Francesco De Bona, Jelena Srnec Novak, Alex Lanzutti, Giulio Lucacci
Engineering Failure Analysis - 135
https://www.sciencedirect.com/science/article/pii/S1350630722001157
Q1 WOS Q1
2021.
Cyclic Plasticity and Low Cycle Fatigue of an AISI 316L Stainless Steel: Experimental Evaluation of Material Parameters for Durability Design
Pelegatti, Marco; Lanzutti, Alex; Salvati, Enrico; Srnec Novak, Jelena; De Bona, Francesco; Benasciutti, Denis
Materials - 14 20
https://www.mdpi.com/1996-1944/14/13/3588
Q2 WOS
03.09.2020.
A variational conditional criterion for buckling in axially graded cantilevers
Hassan Mohamed Abdelalim Abdalla, Jelena Srnec Novak, Daniele Casagrande
Engineering Research Express
https://iopscience.iop.org/article/10.1088/2631-8695/abb4f1
Q3
2020.
Benchmarks for Accelerated Cyclic Plasticity Models with Finite Elements
Srnec Novak, Jelena; De Bona, Francesco; Benasciutti, Denis;
Metals - 10 781
Q1 WOS
2020.
Failure analysis of cemented carbide roller for cold rolling: material characterisation, numerical analysis, and material modelling
Lanzutti, A; Novak, J Srnec; De Bona, F; Bearzi, D; Magnan, M; Fedrizzi, L;
Engineering Failure Analysis - 104755
Q1 WOS
2019.
Thermal distortion in copper moulds for continuous casting of steel: numerical study on creep and plasticity effect
Moro, L; Srnec Novak, J; Benasciutti, D; De Bona, F;
Ironmaking & Steelmaking - 46 97-103
Q1 WOS
2019.
An Isotropic Model for Cyclic Plasticity Calibrated on the Whole Shape of Hardening/Softening Evolution Curve
Srnec Novak, Jelena; De Bona, Francesco; Benasciutti, Denis;
Metals - 9 950
Q2 WOS
2018.
Experimental characterisation of a CuAg alloy for thermo-mechanical applications. Part 2: Design strain-life curves estimated via statistical analysis
Benasciutti, D; Srnec Novak, J; Moro, L; De Bona, F;
Fatigue and Fracture of Engineering Materials and Structures - 41 1378-1388
Q1 WOS
2018.
Experimental characterisation of a CuAg alloy for thermo-mechanical applications. Part 1: Identifying parameters of non-linear plasticity models
Benasciutti, D; Srnec Novak, J; Moro, L; De Bona, F; Stanojević, A;
Fatigue and Fracture of Engineering Materials and Structures - 41 1364-1377
Q1 WOS
2018.
On the damage mechanisms in a continuous casting mold: After-service material characterization and finite element simulation
Novak, Jelena Srnec; Lanzutti, Alex; Benasciutti, Denis; De Bona, Francesco; Moro, Luciano; De Luca, Andrea;
Engineering Failure Analysis - 94 480-492
Q1 WOS
2017.
Innovative design of fire doors: computational modeling and experimental validation
Moro, Luciano ; Boscariol, Paolo ; De Bona, Francesco ; Gasparetto, Alessandro ; Srnec Novak, Jelena
Fire technology - 53 1833-1846
Q2 WOS
Invited Lectures
29.5.2023. - 2.6.2023.
On the modeling of cyclic plasticity of metals with a new isotropic model
J. Srnec Novak, F. De Bona, D. Benasciutti
Cres
Conference Presentations
27.6.2022. - 1.7.2022.
Cyclic response and low-cycle fatigue strength of a Laser Powder Bed Fusion (L-PBF) additive manufactured AISI 316L steel
Benasciutti, Denis ; Pelegatti, Marco ; De Bona, Francesco ; Lanzutti, Alex ; Salvati, Enrico ; Sortino, Marco ; Srnec Novak, Jelena ; Sordetti, Francesco ; Tottis, Givanni ; Vaglio, Emanuele
Prezentacija
ECF23, European Conference on Fracture 2022 Funchal, Madeira, Portugal
21.6.2022. - 22.6.2022.
Low Cycle Fatigue Behaviour of an AISI 316l Stainless Steel Additively Manufactured By Laser Powder Bed Fusion (L-PBF)
Pelegatti, Marco ; Benasciutti, Denis ; De Bona, Francesco ; Lanzutti, Alex ; Salvati, Enrico ; Sortino, Marco ; Srnec Novak, Jelena ; Sordetti, Francesco ; Tottis, Giovanni ; Vaglio, Emanuele
Prezentacija
LCF 9 – Ninth International Conference on Low Cycle Fatigue Berlin, Njemačka
15.9.2021. - 17.9.2021.
Cyclic plasticity and low-cycle fatigue of an AISI 316L stainless steel tested at room temperature
Benasciutti, Denis ; Pelegatti, Marco ; Lanzutti, Alex ; Salvati, Enrico ; Srnec Novak, Jelena ; De Bona, Francesco
Prezentacija
VIRTUAL 20th International Colloquium on Mechanical Fatigue of Metals Wroclaw, Poland
7.6.2021. - 11.6.2021.
Methodological correlation of finite element models to nanoindentation measurements on Si (100)
Srnec Novak, Jelena ; Kamenar, Ervin ; Zelenika, Saša ; De Bona, Francesco, Piovesana, Laura
Prezentacija
Euspen’s 21st International Conference & Exhibition Copenhagen, DK
29.06.2020. - 01.07.2020.
Modeling the cyclic plasticity behavior of 42CrMo4 steel with an isotropic model calibrated on the whole shape of the evolution curve
Jelena Srnec Novak, Marina Franulović, Denis Benasciutti, Francesco De Bona
Prezentacija
1st Virtual European Conference on Fracture-VCF1 Online
https://www.sciencedirect.com/science/article/pii/S2452321620305072
16.9.2019. - 18.9.2019.
Turbine Blade Distortion after Heat Treatment: Preliminary Experimental Investigation and FEM Analysis
De Bona, F; Lanzutti, Alex; Lucacci, G; Moro, Luciano; Srnec Novak, Jelena;
Prezentacija
18th International Conference on Fracture and Damage Mechanics Rodos, grčka
5.7.2019. - 7.7.2019.
FEM strategies for Large Scale Thermo-Mechanical Simulations with Material Non-linearity
De Bona, Francesco; Benasciutti, Denis; Moro, Luciano; Novak, Jelena Srnec;
Prezentacija
2019 World Symposium on Smart Materials and Applications, WSSMA 2019 Harbin, Kina
2019
Numerical simulation of cyclic plasticity in mechanical components under low cycle fatigue loading: accelerated material models
Novak, J Srnec; De Bona, F; Benasciutti, D;
Prezentacija
Fatigue Design 2019, International Conference on Fatigue Design Senlis, Francuska
https://www.sciencedirect.com/science/article/pii/S245232161930527X
15.6.2018. - 17.6.2018.
Material Modelling in Multi-Physics FEM Simulation
De Bona, Francesco; Benasciutti, Denis; Moro, Luciano; Srnec Novak, Jelena;
Prezentacija
3rd International Conference on Material Science and Engineering, ICMSE 2018 Jeju Island, Južna Koreja
27.5.2018. - 1.6.2018.
Acceleration techniques for the numerical simulation of the cyclic plasticity behaviour of mechanical components under thermal loads
Novak, Jelena Srnec; De Bona, Francesco; Benasciutti, Denis; Moro, Luciano;
Prezentacija
12th International Fatigue Congress Poitiers, Francuska
29.11.2017. - 30.11.2017.
Experimental characterization of a CuAg alloy for thermo-mechanical applications: non-linear plasticity models and low-cycle fatigue curves
Benasciutti, D; De Bona, F; Moro, L; Novak, J Srnec;
Prezentacija
7th International Conference on Fatigue Design, Fatigue Design 2017 Senlis, Francuska
https://www.sciencedirect.com/science/article/pii/S1877705818303059
19.9.2017. - 22.9.2017.
Metallurgical and surface damage analysis in a copper mold after service
Novak, Jelena Srnec; Lanzutti, Alex; Benasciutti, Denis; De Bona, Francesco; Moro, Luciano; De Luca, Andrea;
Prezentacija
34th Danubia Adria Symposium on Advances in Experimental Mechanics Trst, Italija
https://www.sciencedirect.com/science/article/pii/S2214785318321126
6.9.2017. - 9.9.2017.
Accelerated cyclic plasticity models for FEM analysis of steelmaking components under thermal loads
Novak, J Srnec; Moro, L; Benasciutti, D; De Bona, F;
Prezentacija
46th Conference on Stress Analysis and Mechanical Engineering Design, AIAS 2017 Pisa, Italija
https://www.sciencedirect.com/science/article/pii/S2452321617305127
18.7.2017. - 20.7.2017.
Copper mold for continuous casting of steel: modelling strategies to assess thermal distortion and durability
Moro, Luciano; Srnec Novak, Jelena; Benasciutti, Denis; De Bona, F;
Prezentacija
16th International Conference on Fracture and Damage Mechanics, 2017 Firenca, Italija
18.11.2015. - 19.11.2015.
Thermo-mechanical finite element simulation and fatigue life assessment of a copper mould for continuous casting of steel
Novak, Jelena Srnec; Benasciutti, Denis; De Bona, Francesco; Stanojević, Aleksandar; Huter, Patrik;
Prezentacija
Fatigue Design 2015, International Conference Proceedings, 6th Edition Senlis, Francuska
https://www.sciencedirect.com/science/article/pii/S1877705815045701
3.11.2015. - 5.11.2015.
Estimation of material parameters in nonlinear hardening plasticity models and strain life curves for CuAg alloy
Novak, J Srnec; Benasciutti, Denis; De Bona, F; Stanojević, A; De Luca, A; Raffaglio, Y;
Prezentacija
1st International Conference on Materials, Processing and Product Engineering 2015, MPPE 2015 Leoben, Austrija
https://iopscience.iop.org/article/10.1088/1757-899X/119/1/012020
Organisation of Conferences and Symposia
29.8.2023. - 1.9.2023.
International Conference on Structural Integrity
Funchal, Madeira Portugal Sudjelovanje na pisanju rada
12.6.2023. - 16.6.2023.
EUSPEN 23rd International conference & Exhibition
Copenhagen, Denmark Sudjelovanje na pisanju rada
29.5.2023. - 2.6.2023.
44th International Seminar on Material Mechanics
Cres, Hrvatska Sudionik i prezenter
26.4.2023. - 27.4.2023.
MecaNano General Meeting 2023
Madrid, Španjolska Sudionik i prezenter
27.6.2022. - 1.7.2022.
ECF23, European Conference on Fracture 2022
Funchal, Madeira, Portugal Sudjelovanje na pisanju rada
21.6.2022. - 23.6.2022.
LCF9 NINTH INTERNATIONAL CONFERENCE ON LOW CYCLE FATIGUE
Berlin, Njemačka Sudjelovanje na pisanju rada
7.6.2021. - 11.6.2021.
Euspen's 21st International Conference & Exhibition
Copenhagen, DK sudionik i prezenter
29.6-1.7.2020
1st Virtual European Conference on Fracture VECF1
Virtualna konferencija - Madeira sudionik i prezenter
20-21.11.2019
Fatigue Design 2019, 8th International conference on fatigue design
Senlis, Francuska sudionik i prezenter
16-18.9.2019
18th International Conference on Fracture and Damage Mechanics, FDM 2019
Rodos, Grčka Sudjelovanje u pisanju rada
4-7.9.2019
AIAS 2019
Assisi, Italija sudionik i prezenter
5-7.7.2019
2019 World Symposium on Smart Materials and Applications, WSSMA 2019
Harbin, Kina Sudjelovanje u pisanju rada
27-30.5.2019
2nd International Conference on Material Strength and Applied Mechanics, MSAM 2019
Kijev, Ukrajina Sudjelovanje u pisanju rada
4-6.9.2018
17th International Conference on Fracture and Damage Mechanics, FDM 2018
Bankok, Tajland Sudjelovanje u pisanju rada
15-17.6.2018
3rd International Conference on Material Science and Engineering, ICMSE 2018
Jeju Island, Južna Koreja Sudjelovanje u pisanju rada
27.5.-1.6.2018
12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018)
Poitiers Futuroscope, Francuska Sudjelovanje u pisanju rada
28-31.12.2017
2017 International Conference on Industrial Design Engineering, ICIDE 2017
Dubai, Ujedinjeni Arapski Emirati Sudjelovanje u pisanju rada
29-30.11.2017
7th International Conference on Fatigue Design, Fatigue Design 2017
Senlis, Francuska Sudjelovanje u pisanju rada
19-22.9.2017
34th Danubia Adria Symposium on Advances in Experimental Mechanics
Trst, Italija sudionik i prezenter
6-9.9.2017
46th Conference on Stress Analysis and Mechanical Engineering Design, AIAS 2017
Pisa, Italija Sudjelovanje u pisanju rada
18.-20.7.2017
16th International Conference on Fracture and Damage Mechanics, 2017
Firenca, Italija Sudjelovanje u pisanju rada
18-19.11.2015
Fatigue Design 2015, 6th International conference on fatigue design
Senlis, Francuska sudionik i prezenter
3-5.11.2015
MPPE 2015 - 1st International Conference on Materials, Processing and Product Engineering 2015,
Leoben, Austrija sudionik i prezenter
Journal Editor
31.07.2020. - 30.9.2022.
Special Issue "Material Modeling in Multiphysics Simulation"
https://www.mdpi.com/journal/metals/special_issues/Modeling_Multiphysics_Simulation
31.05.2018. - 30.11.2019.
Special Issue "Metal Plasticity and Fatigue at High Temperature"
https://www.mdpi.com/journal/metals/special_issues/metal_plasticity_Fatigue
Peer Reviews
2022.
Dynamic Windage Yaw Angle and Dynamic Wind Load Factor of a Suspension Insulator String
2021.
Influence of thermo-mechanical material properties on finite element simulation of a welding process
2021.
Energy Absorption and Mechanical Performance of Functionally Graded Soft -Hard Lattice Structures
2021.
Effect of Riveting Angle and Direction on Fatigue Performance of Riveted Lap Joints
2020.
Failure Pressure Prediction of High Toughness Pipeline with a Single Corrosion Defect Subjected to Combined Loadings using Artificial Neural Network
2020.
Influence of impact-oscillatory loading on fatigue life of aluminum alloy 2024-Т351
2020
Effect of Specimen Size on the True Stress–True Strain Relationship Up to the Plastic-Deformation Limit in a Tempered Martensite and Its Descriptions by Using the Hollomon Equation
2020
An investigation study of the thermo-mechanical loading on the piston of a diesel engine with design improvements
2020
Fracture toughness correction due to the in- and out-of-plane constraint
2020
Process simulation of Ohno Continuous Casting for single crystal copper prepared from scrap copper in waste printed circuit boards
2019
A New 3-D Method for Reactor Core Vibration Based on Silicon Steel Lamination Rules and Application in UHV Shunt Reactors
2019
Optimization of Cooling Conditions in Direct Chill Casting of Cu-Fe-P alloy
2019
Direct Chill Casting Optimization of Cu-Fe-P alloy using Finite Element Modeling
2019
Modelling the Strain Range Dependent Cyclic Hardening of SS304 and 08Ch18N10T Stainless Steel with a Memory Surface
2018
Applied mathematical modelling of continuous casting processes: a review
2018
Control and design of the continuous casting process based on advanced numerical models
Projects
Research Projects
2022. - 2023.
Primjena nanoindentacije za procjenu mehaničkih svojstva AM metalnih materijala
Voditelj
Sveučilište u Rijeci 20294,52
2021. - 2022.
Razvoj naprednih metoda za procijenu elasto-plastičnog ponašanja materijala temeljen na nanoindentacijskim podacima / Development of advanced methods to assess the elasto-plastic material behaviour using nanoindentation data
Voditelj
Sveučilište u Rijeci 45.704,06 HRK
2021.
Istraživanje i razvoj prediktivnih modela ponašanja konstrukcijskih materijala temeljenih na metodama strojnog učenja
Suradnik
Sveučilište u Rijeci
15.12.2020. -
Razvoj modela za procjenu ponašanja materijala temeljenih na strojnom učenju - Development of machine learning-based models for materials behavior estimation
Suradnik
HRZZ
27.06.2019. - 31.12.2020.
ISOPLAST – Verso un nuovo modello isotropo per carichi ciclici con plasticita diffusa: modelli teorici, simulazioni numeriche e calibrazione sperimentale
Suradnik
University of Ferrara, Italija 5000 €
2019 - 2020
Nuovi materiali per sicurezza al fuoco in ambiente navale - NUMASTE
Suradnik
Regione Autonoma Friuli Venezia Giulia nell’ambito del POR FESR 2014-2020
2017 - 2019
Studio con metodi numerici dello stato di deformazione di un componente in acciaio sottoposto a trattamento termico di tempra e rinvenimento
Suradnik
Regione Autonoma Friuli Venezia Giulia nell’ambito del POR FESR 2014-2020
2016 - 2017
Pannelli tagliafuoco alleggeriti per uso navale - PANTAF
Suradnik
Regione Autonoma Friuli Venezia Giulia nell’ambito del POR FESR 2014-2020 266.111,22 €
https://friulinnovazione.it/it/consulenza-e-supporto/imprese/trasferimento-tecnologico/pantaf/
2013
POR FESR 2007/2013 Porte Tagliafuoco Innovative - Innovative fire doors in the sector of shipbuilding and yachting
Suradnik
Regione Friuli Venezia Giulia - POR FESR 2007-2013
Research Projects - Project Leader/Principal Investigato
Assoc. Prof. D. Sc.Jelena Srnec Novakmag. ing. mech
Application of nanoindentation technique to assess the mechanical properties of AM metallic materials
Technical sciences
Assoc. Prof. D. Sc.Jelena Srnec Novakmag. ing. mech
Development of advanced methods to assess the elasto-plastic material behaviour using nanoindentation data
Technical sciences
Research Projects - Project Member/Project Researcher
Prof. D. Sc.Robert Basandipl. ing.
Research and development of machine learning-based predictive models of design-relevant materials' behavior
Technical sciences