Portfolio
izv. prof. dr. sc.
Leo Škec
mag.ing.aedif.
Faculty of Civil Engineering
Contact
Visibility
Research
Journal Articles
2023.
Mixed-mode delamination of layered structures modeled as Timoshenko beams with linked interpolation
Ranjbar, Maedeh ; Škec, Leo ; Jelenić, Gordan ; Ribarić, Dragan
International Journal for Numerical Methods in Engineering - 124 1773-1797
https://onlinelibrary.wiley.com/doi/full/10.1002/nme.7187
Q1
2023.
Investigation of the influence of the loading arrangement on the measured mode-I fracture resistance
Hlača, Ivan ; Škec, Leo ; Ribarić, Dragan ; Grbac, Marin
Journal of Adhesion Science and Technology
https://doi.org/10.1080/01694243.2023.2230654
Q2
2023.
Experimental and numerical study of rate-dependent mode-I failure of a structural adhesive
Škec, Leo ; Alfano, Giulio
The Journal of Adhesion - 99 1323–1355
https://doi.org/10.1080/00218464.2022.2106132
Q2
2023.
Closed-form solutions for two-layer Timoshenko beams with interlayer slip, uplift and rotation compliance
Siciliano, Alfio Francesco ; Škec, Leo ; Jelenić, Gordan
Meccanica - 58 893–918
https://link.springer.com/article/10.1007/s11012-023-01655-4
Q2
2021.
Closed-form solutions for modelling the rotational stiffness of continuous and discontinuous compliant interfaces in two-layer Timoshenko beams
Siciliano, Alfio Francesco ; Škec, Leo ; Jelenić, Gordan
Acta Mechanica - 232 2793-2824
Q2
2021.
Experimental and numerical study on the compressive behaviour of partially accessible concrete columns strengthened by a layer of high-performance concrete
Siciliano, Alfio Francesco ; Škec, Leo ; Fossetti, Marinella ; Jelenić, Gordan
Structures - 34 4100-4112
Q1 Q2
2019.
Identification of parameters of a bi-linear cohesive-zone model using analytical solutions for mode-I delamination
Škec, Leo
Engineering Fracture Mechanics - 214 558-577
https://www.sciencedirect.com/science/article/abs/pii/S0013794418312578
Q1
2019.
Complete analytical solutions for double cantilever beam specimens with bi-linear quasi- brittle and brittle interfaces
Škec, Leo ; Alfano, Giulio ; Jelenić, Gordan
International journal of fracture - 215 1-37
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=935890
Q1
2019.
Enhanced simple beam theory for characterising mode-I fracture resistance via a double cantilever beam test
Škec, Leo ; Alfano, Giulio ; Jelenić, Gordan
Composites Part B: Engineering - 167 250-262
https://www.sciencedirect.com/science/article/pii/S1359836818314628
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=976186
Q1
2018.
On Gc, Jc and the characterisation of the mode-I fracture resistance in delamination or adhesive debonding with an accurate and industry-friendly data-reduction method
Škec, Leo ; Alfano, Giulio ; Jelenić, Gordan
International journal of solids and structures - 144/145 100-122
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=922411
Q1
2017.
Geometrically non-linear multi-layer beam with interconnection allowing for mixed-mode delamination
Škec, Leo ; Jelenić, Gordan
Engineering fracture mechanics - 169 1-17
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=843446
Q1
2015.
Mixed-mode delamination in 2D layered beam finite elements
Škec, Leo ; Jelenić, Gordan ; Lustig, Nikola
International journal for numerical methods in engineering - 104 767-788
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=750770
Q1
2014.
Kinematics of layered reinforced-concrete planar beam finite elements with embedded transversal cracking
Šćulac, Paulo ; Jelenić, Gordan ; Škec, Leo
International journal of solids and structures - 51 74-92
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=638311
Q1
2014.
Analysis of a geometrically exact multi-layer beam with a rigid interlayer connection
Škec, Leo ; Jelenić, Gordan
Acta mechanica - 225 523-541
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=638309
Q1
2013.
Glued Timber-Concrete Beams - Analytical and Numerical Models for Assesment of Composite Action
Škec, Leo ; Bjelanović, Adriana ; Jelenić, Gordan
Engineering review - 33 41-49
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=610238
Q2
2012.
Analytical modelling of multilayer beams with compliant interfaces
Škec, Leo ; Schnabl, Simon ; Planinc, Igor ; Jelenić, Gordan
Structural engineering and mechanics - 44 465-485
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=596659
Q2
Invited Lectures
25.09.2019.
TEORIJSKI, NUMERIČKI I EKSPERIMENTALNI PRISTUP PROBLEMU RASLOJAVANJA LIJEPLJENIH KONSTRUKCIJSKIH SPOJEVA
Škec, Leo
Rijeka (Hrvatska)
http://csm.hr/?pg=vijest_detalji&lng=hr&vijest_id=310&lnk=vijesti
12.09.2019.
Theoretical, numerical and experimental investigation of fracture resistance in adhesive joints
Škec, Leo
Rijeka (Hrvatska)
https://mfc.uniri.hr/wp-content/uploads/2019/09/PROGRAM-KONFERENCIJE-2019-1.pdf
Conference Presentations
21.09.2023. - 22.09.2023.
Karakterizacija i modeliranje raslojavanja lijepljenih spojeva ovisnog o brzini
Škec, Leo ; Alfano, Giulio
Predavanje
12. susret Hrvatskog društva za mehaniku Split, Hrvatska
https://csm.hr/upload_hdm/sadrzaji/12_susret_HDM/Konacan%20program%2012.%20susreta%20HDMa.pdf
28.09.2022. - 30.09.2022.
Experimental validation of a novel numerical model for ratedependent mode-I delamination of adhesive joints
Škec, Leo ; Alfano, Giulio
Predavanje
10th International Congress of Croatian Society of Mechanics (ICCSM) Pula, Hrvatska
16.09.2021. - 17.09.2021.
Eksperimentalna i numerička analiza raslojavanja lijepljenih nosača ovisnog o brzini nanošenja opterećenja
Škec, Leo ; Alfano, Giulio
Predavanje
11. susret Hrvatskog društva za mehaniku Rijeka
19.09.2019.
On the Use LEFM, NLFM and CZM in the Analysis of a DCB Test
Škec, Leo; Alfano, Giulio; Jelenić, Gordan
Predavanje
7th ECCOMAS THEMATIC CONFERENCE ON THE MECHANICAL RESPONSE OF COMPOSITES Girona (Španjolska)
http://composites2019.udg.edu/wp/wp-content/uploads/2019/09/programa-vSponsors-v1309.pdf
11.07.2019.
On the use LEFM, NLFM and CZM in the analysis of a DCB test
Škec, Leo ; Alfano, Giulio; Jelenić, Gordan
Predavanje
5TH INTERNATIONAL CONFERENCE ON STRUCTURAL ADHESIVE BONDING Porto (Portugal)
https://paginas.fe.up.pt/~abconference/ab2019/AB2019%20Prog.pdf
13.06.2019.
On the use LEFM, NLFM and CZM in the analysis of a DCB test
Škec, Leo; Alfano, Giulio; Jelenić, Gordan
Predavanje
VI International Conference on Computational Modeling of Fracture and Failure of Materials and Structures Braunschweig (Njemačka)
https://congress.cimne.com/cfrac2019/frontal/ProgramPrint.asp?id=Th06I03
22.09.2018.
On characterising fracture resistance in mode-I delamination
Škec, Leo ; Jelenić, Gordan ; Alfano, Giulio
Predavanje
9th International Conference of the Croatian Society of Mechanics Split, Hrvatska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=958350
06.07.2018.
On characterising fracture resistance in mode-I delamination
Škec, Leo ; Alfano, Giulio ; Jelenić, Gordan
Predavanje
10th European Solid Mechanics Conference (ESMC 2018) Bologna, Italija
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=976195
14.06.2018.
On characterising fracture resistance in mode-I delamination
Leo Škec, Giulio Alfano, Gordan Jelenić
Predavanje
Conference: 6th European Conference on Computational Mechanics (ECCM 6) 7th European Conference on Computational Fluid Dynamics (ECFD 7) Glasgow, Škotska
22.09.2017.
Mixed-mode rate-dependent delamination in geometrically non-linear multi-layer beam finite elements
Škec, Leo ; Alfano, Giulio ; Jelenić, Gordan
Predavanje
6th ECCOMAS Thematic Conference on the Mechanical Response of Composites - Composites 2017 Eindhoven, Nizozemska
07.09.2017.
Delamination analysis using geometrically non-linear beam finite elements and a rate-dependent cohesive zone model
Škec, Leo ; Alfano, Giulio ; Jelenić, Gordan
Predavanje
XIV International Conference on Computational Plasticity. Fundamentals and Applications - COMPLAS 2017 Barcelona, Španjolska
08.07.2017.
Numeričko modeliranje delaminacije ovisne o brzini kod grednih slojevitih nosača
Škec, Leo ; Alfano, Giulio ; Jelenić, Gordan
Predavanje
8. SUSRETHRVATSKOG DRUŠTVA ZA MEHANIKU Osijek, Hrvatska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=891889
16.06.2017.
Geometrically nonlinear beam finite elements for modelling the mixed-mode rate-dependent delamination in layered structures
Škec, Leo ; Alfano, Giulio ; Jelenić, Gordan
Predavanje
CFRAC 2017 - International Conference on Computational Fracture and Failure of Materials and Structures Nantes, Francuska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=882250
13.04.2017.
Modelling mixed-mode rate-dependent delamination in layered structures using geometrically nonlinear beam finite elements
Škec, Leo ; Alfano, Giulio ; Jelenić, Gordan
Predavanje
25th Conference on Computational Mechanics - UKACM 2017 Birmingham, Velika Britanija
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=882242
14.07.2016.
A finite element formulation for a 2D geometrically exact multi-layer beam with interconnection allowing for mixed-mode delamination
Škec, Leo ; Jelenić, Gordan
Predavanje
MECHCOMP 2 - 2nd International Conference of Mechanics of Composites Porto, Portugal
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=830400
02.10.2015.
Reference linear solution for thick curved beam finite element with constant curvature
Gordan Jelenić ; Edita Papa Dukić ; Dragan Ribarić ; Leo Škec
Predavanje
8th International Congress of Croatian Society of Mechanics Opatija, Hrvatska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=880611
11.09.2015.
A multi-layer beam finite element for mixed-mode delamination in 2D beams
Škec, Leo ; Jelenić, Gordan
Predavanje
PCM-CMM-2015 – 3rd Polish Congress of Mechanics & 21st Computer Methods in Mechanics Gdansk, Poljska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=776093
26.09.2014.
NUMERIČKI MODEL VIŠESLOJNE GREDE S POPUSTLJIVOM VEZOM MEĐU SLOJEVIMA
Leo Škec
Predavanje
Drugi skup mladih istraživača iz područja građevinarstva i srodnih tehničkih znanosti Rijeka, Hrvatska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=717588
2014.
Modeliranje slojevitih greda s popustljivim kontaktom među slojevima
Škec Leo, Jelenić Gordan
Predavanje
Zbornik radova Šestoga susreta Hrvatskoga društva za mehaniku Građevinski fakultet Sveučilišta u Rijeci
2013.
Geometrijski nelinearni model višeslojne grede
Leo Škec
Predavanje
Prvi skup mladih istraživača iz područja građevinarstva, arhitekture, geodezije i elektrotehnike "Zajednički temelji" Split
2013.
ANALIZA GEOMETRIJSKI NELINEARNIH VIŠESLOJNIH GREDA( Analysis of Geometrically non-linear multi-layer beams )
Škec, Leo; Jelenić, Gordan
Predavanje
Peti susret Hrvatskog društva za mehaniku Donja Stubica, Hrvatska
2013.
Geometrically exact multi-layer beams with a rigid interconnection
Škec, Leo; Jelenić, Gordan
Predavanje
2nd ECCOMAS Young Investigators Conference (YIC 2013) Bordeaux, Francuska
10.09.2012.
Plain- and reinforced-concrete planar beam finite elements with embedded transversal cracking
Jelenić, Gordan; Šćulac, Paulo; Škec, Leo
6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Beč, Austrija
2012.
ANALYSIS OF A GEOMETRICALLY EXACT MULTI-LAYER COMPOSITE BEAM WITH A RIGID INTERLAYER CONNECTION
Škec, Leo; Jelenić, Gordan
Predavanje
7th International Congress of Croatian Society of Mechanics Zadar, Hrvatska
2011.
EFFECTS OF SLOPE AND APEX ZONE GEOMETRY OF GLULAM BEAMS WITH SPECIAL SHAPE ON THEIR DESIGN
Bjelanović, Adriana; Lustig, Nikola; Škec, Leo
8th International Scientific Conference on Production Engineering: Development and modernization of production, RIM 2011 Velika Kladuša, Bosna i hercegovina
Mentoring doctoral students
2018. - 2020.
Experimental, analytical and numerical study of unilaterally strengthened concrete elements : doctoral thesis in structural engineering
Alfio Francesco Siciliano Doctorate
University of Enna Kore, doctoral School in "infrastrutture civili per il territorio", Faculty of enginnering and architecture
Università degli Studi di Enna Kore (Italija)
Date of degree: 07.02.2020.
Organisation of Conferences and Symposia
29.05.2014. - 30.05.2014.
6. susret Hrvatskoga društva za mehaniku
Rijeka Član organizacijskog odbora i tehnički urednik zbornika
Journal Editor
2013. - 2015.
Engineering review
Peer Reviews
2018. -
Mechanics Research Communications ; Journal of Adhesion Science and Technology ; International Journal of Solids and Structures ; Composite Structures ; Finite Elements in Analysis and Design ; European Journal of Mechanics - A/Solids ; Theoretical and Applied Fracture Mechanics ; International Journal for Numerical Methods in Engineering ; Engineering Structures ; Polymer Testing ; Engineering Review ; Applied Sciences ; Coatings ;
Projects
Research Projects
1.1.2020. - 31.12.2021.
Razvoj konačnog elementa za ljuske na konceptu vezane interpolacije i njegova primjena na uslojene strukture
Suradnik
Ministarstvo znanosti i obrazovanja RH 7.438,00 kn
01.03.2017. - 28.02.2021.
Metoda usvojenih deformacija za konačne elemente slojevitih ploča i ljuski i njena primjena na probleme delaminacije (ASDEL)
Suradnik
Hrvatska zaklada za znanost 612.568,00 kn
11.11.2016. - 10.07.2018.
Modelling mixed-mode rate-dependent delamination in layered structures using geometrically nonlinear beam finite elements (MOLAY-STRUDEL)
Istraživač
European Comission (H2020-MSCA-IF-2015) 152.879,00 eur
01.09.2014. - 31.08.2018.
Configuration-dependent approximation in non-linear finite-element analysis of structures (CANFAS)
Suradnik
Hrvatska zaklada za znanost 938.478,00 kn
01.11.2009. - 28.02.2010.
Stabilnost višeslojnih kompozitnih stupova uz klizanje i razmicanje slojeva
Doktorand
Hrvatska zaklada za znanost 18.300,00 kn
Research Projects - Project Leader/Principal Investigato
izv. prof. dr. sc.Leo Škecmag.ing.aedif.
Numeričko i eksperimentalno istraživanje raslojavanja u klizećem modu ovisno o brzini nanošenja opterećenja
Technical sciences
Research Projects - Project Member/Project Researcher
Gordan Jelenić
Ispitivanje vitkih grednih prostornih konstrukcija s naglaskom na validaciju modela
Technical sciences
UNIRI Class Projects - Project Member/Project Researcher
Teo Mudrić
Applied mechanics in modern engineering practice
2023