Portfolio
Contact
Visibility
Research
Journal Articles
2021.
Automatic Evaluation of the Lung Condition of COVID-19 Patients Using X-ray Images and Convolutional Neural Networks
Ivan Lorencin, Sandi Baressi Šegota, Nikola Anđelić, Anđela Blagojević, Tijana Šušteršić, Alen Protić, Miloš Arsenijević, Tomislav Ćabov, Nenad Filipović, Zlatan Car
Journal of Personalized Medicine - 11
Q1 WOS Exc
2021.
Estimation of COVID-19 epidemic curves using genetic programming algorithm
Nikola Anđelić, Sandi Baressi Šegota, Ivan Lorencin, Vedran Mrzljak, Zlatan Car
Health Informatics Journal - 27
Q2 WOS
2021.
Estimation of COVID-19 Epidemiology Curve of the United States Using Genetic Programming Algorithm
Nikola Anđelić, Sandi Baressi Šegota, Ivan Lorencin, Zdravko Jurilj, Tijana Šušteršič, Anđela Blagojević, Alen Protić, Tomislav Ćabov, Nenad Filipović, Zlatan Car
International Journal of Environmental Research and Public Health - 18 959
Q1 WOS
2021.
Thermodynamic Analysis of a Condensate Heating System from a Marine Steam Propulsion Plant with Steam Reheating
Vedran Mrzljak, Ivan Lorencin, Nikola Anđelić, Zlatan Car
Journal of Marine Science and Application - 20
Q2 WOS
2021.
On Urinary Bladder Cancer Diagnosis: Utilization of Deep Convolutional Generative Adversarial Networks for Data Augmentation
Ivan Lorencin, Sandi Baressi Šegota, Nikola Anđelić, Vedran Mrzljak, Tomislav Ćabov, Josip Španjol, Zlatan Car
Biology - 10
Q1 WOS
2021.
Combined machine learning and finite element simulation approach towards personalized model for prognosis of COVID-19 disease development in patients
Blagojević, Anđela; Šušteršič, Tijana; Lorencin, Ivan; Šegota, Sandi Baressi; Milovanović, Dragan; Baskić, Danijela; Baskić, Dejan; Car, Zlatan; Filipović, Nenad;
EAI Endorsed Transactions on Bioengineering and Bioinformatics - 1
01.07.2020.
Impact of COVID-19 on Forecasting Stock Prices: An Integration of Stationary Wavelet Transform and Bidirectional Long Short-Term Memory
Štifanić, Daniel; Musulin, Jelena; Miočević, Adrijana; Šegota, Sandi Baressi; Šubić, Roman; Car, Zlatan;
Complexity
Q1 WOS
2020.
Use of Convolutional Neural Network for Fish Species Classification
Štifanić, Daniel; Musulin, Jelena; Car, Zlatan; Čep, Robert;
Pomorski zbornik - 59
2020.
Comparison of Power Distribution, Losses and Efficiencies of a Steam Turbine with and without Extractions
Baressi Šegota, Sandi; Meštrić, Hrvoje; Car, Zlatan;
Tehnički glasnik - 14
2020.
Estimation of gas turbine shaft torque and fuel flow of a CODLAG propulsion system using genetic programming algorithm
Anđelić, Nikola; Baressi Šegota, Sandi; Lorencin, Ivan; Car, Zlatan;
Pomorstvo - 34
Q2
2020.
Dataset Size-Based Approach In Design Of Artificial Neural Network For Breast Cancer Diagnosis
Lorencin, Ivan; Anđelić, Nikola; Šegota, Sandi Baressi; Štifanić, Daniel; Musulin, Jelena; Mrzljak, Vedran; Markova-Car, Elitza; Car, Zlatan;
World of Health - 3
2020.
Use of Artificial Neural Network for Estimation of Propeller Torque Values in a CODLAG Propulsion System
Baressi Šegota, Sandi; Štifanić, Daniel; Ohkura, Kazuhiro; Car, Zlatan;
Pomorski zbornik - 58 25-38
2020.
Frigate Speed Estimation Using CODLAG Propulsion System Parameters and Multilayer Perceptron
Baressi Šegota, Sandi; Lorencin, Ivan; Musulin, Jelena; Štifanić, Daniel; Car, Zlatan;
NAŠE MORE: znanstveni časopis za more i pomorstvo - 67 117-125
Q2 WOS
2020
Energy Loss Analysis at the Gland Seals of a Marine Turbo-Generator Steam Turbine
Kocijel, Lino; Poljak, Igor; Mrzljak, Vedran; Car, Zlatan;
Tehnički glasnik - 14 19-26
2020.
Path planning optimization of six-degree-of-freedom robotic manipulators using evolutionary algorithms
Sandi Baressi Šegota, Nikola Anđelić, Ivan Lorencin, Milan Saga, Zlatan Car
International Journal of Advanced Robotic Systems - 17
Q2 WOS
2020.
Using multi-layer perceptron with Laplacian edge detector for bladder cancer diagnosis
Lorencin, Ivan; Anđelić, Nikola; Španjol, Josip; Car, Zlatan;
Artificial Intelligence in Medicine - 102 101746
https://doi.org/10.1016/j.artmed.2019.101746
Q1 WOS
2019.
Analysis of Gas Turbine Operation before and after Major Maintenance
Mrzljak, Vedran; Anđelić, Nikola; Lorencin, Ivan; Car, Zlatan;
Pomorski zbornik - 57 57-70
2019.
Multilayer Perceptron approach to Condition-Based Maintenance of Marine CODLAG Propulsion System Components
Lorencin, Ivan; Anđelić, Nikola; Mrzljak, Vedran; Car, Zlatan;
Pomorstvo - 33 181-190
Q3 WOS
2019.
Developing End-to-End Control Policies for Robotic Swarms Using Deep Q-learning
Wei, Yufei; Nie, Xiaotong; Hiraga, Motoaki; Ohkura, Kazuhiro; Car, Zlatan;
Journal of Advanced Computational Intelligence and Intelligent Informatics - 23 920-927
Q3 WOS
2019.
Comparison of Edge Detectors for Urinary Bladder Cancer Diagnostic
Lorencin, I; Barišić, B; Anđelić, N; Španjol, J; Car, Z;
International Conference on Innovative Technologies, IN-TECH
2019.
Genetic Algorithm Approach to Design of Multi-Layer Perceptron for Combined Cycle Power Plant Electrical Power Output Estimation
Lorencin, Ivan; Anđelić, Nikola; Mrzljak, Vedran; Car, Zlatan;
Energies - 12 4352
Q1 WOS
2019.
Marine Objects Recognition Using Convolutional Neural Networks
Lorencin, Ivan; Anđelić, Nikola; Mrzljak, Vedran; Car, Zlatan;
NAŠE MORE: znanstveno-stručni časopis za more i pomorstvo - 66 112-119
Q2 WOS
2019.
NEMS Resonator for detection of Chemical Warfare Agents based on Double Layer Graphene Sheet
Anđelić, Nikola; Čanađija, Marko; Car, Zlatan;
9. susret Hrvatskog društva za mehaniku: 50 godina Društva
2019.
Exergy analysis of marine steam turbine labyrinth (gland) seals
Lorencin, Ivan; Anđelić, Nikola; Mrzljak, Vedran; Car, Zlatan;
Pomorstvo - 33 76-83
Q3 WOS
2019.
NEMS Resonators for Detection of Chemical Warfare Agents Based on Graphene Sheet
Anđelić, Nikola; Car, Zlatan; Čanađija, Marko;
Mathematical Problems in Engineering - 2019
Q2 WOS
2019.
Comparison of energy flow stream and isentropic method for steam turbine energy analysis
Blažević, Sebastijan; Mrzljak, Vedran; Anđelić, Nikola; Car, Zlatan;
Acta Polytechnica - 59 109-125
https://ojs.cvut.cz/ojs/index.php/ap/article/view/5111
Q2 WOS
2019.
Autonomous task allocation by artificial evolution for robotic swarms in complex tasks
Wei, Yufei; Hiraga, Motoaki; Ohkura, Kazuhiro; Car, Zlatan;
Artificial Life and Robotics - 24 127-134
https://link.springer.com/article/10.1007%2Fs10015-018-0466-6
Q3 WOS
2018.
EXHAUST GAS EMISSIONS FROM TURBOCHARGED DIRECT INJECTION DIESEL ENGINE DURING THE FUEL MASS FLOW VARIATION
Mrzljak, Vedran; Blažević, Sebastijan; Anđelić, Nikola; Car, Zlatan;
International Conference on Innovative Technologies, IN-TECH 2018
2018.
EXHAUST GAS EMISSIONS FROM TURBOCHARGED DIRECT INJECTION DIESEL ENGINE DURING THE FUEL MASS FLOW VARIATION
Mrzljak, Vedran; Blažević, Sebastijan; Anđelić, Nikola; Car, Zlatan;
International Conference on Innovative Technologies, IN-TECH 2018
2018.
SEPSIS PREDICTION USING ARTIFICIAL INTELLIGENCE ALGORITHMS
Brnić, Mateo; Čondrić, Emanuel; Blažević, Sebastijan; Anđelić, Nikola; Borović, Emanuel; Car, Zlatan;
International Conference on Innovative Technologies, IN-TECH 2018
2018.
ARTIFICIAL INTELLIGENCE-BASED METHOD FOR URINARY BLADDER CANCER DIAGNOSTIC
Bogović, Korino; Lorencin, Ivan; Anđelić, Nikola; Blažević, Sebastijan; Smolčić, Klara; Španjol, Josip; Car, Zlatan;
International Conference on Innovative Technologies, IN-TECH 2018
2018.
TRAJECTROY PLANNING USING GENETIC ALGORITHM FOR THREE JOINTS ROBOT MANIPULATOR
Anđelić, Nikola; Blažević, Sebastijan; Car, Zlatan;
International Conference on Innovative Technologies, IN-TECH 2018
2018.
Magnetic Bearing Control System based on PI and PID Controllers
Puskaric, Miroslav; Car, Zlatan; Bulic, Neven;
Tehnički vjesnik - 25 136-140
Q2 WOS
2017.
Computer driven bioavailability analysis of some important compounds found in anticancer herbs
Tomić, Draško; Puškarić, Miroslav; Car, Zlatan;
4th Southeast European Conference on Computational Mechanics
2017.
Running HPC applications on many million cores Cloud
Tomić, Draško ; Car, Zlatan ; Ogrizović, Dario
- 226-231
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=877325
2017.
Research of Unstable Behavior of Iterative Path Planning Algorithm for Robot Manipulator
Blažević, Sebastijan ; Anđelić Nikola ; Car, Zlatan
- 57-60
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=892293
2017.
Determination of Natural Vibrations of Simply Supported Single Layer Graphene Sheet using Non-Local Kirchhoff Plate Theory
Anđelić, Nikola ; Čanađija, Marko ; Car, Zlatan
- 33-36
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=892326
2017.
In silico testing of the toxicity for some anticancer herbal compounds
Tomić, Draško ; Puškarić, Miroslav ; Car, Zlatan
- 217-220
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=916101
2017.
COMBINATION OF CONTACT AND OPTICAL 3D DIGITIZING METHODS FOR THEIR APPLICATION IN REVERSE ENGINEERING
Sokac, Mario ; Željko, Santoši ; Budak, Igor ; Car, Zlatan ; Đorđe, Vukelić
- 65-68
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=916842
2017.
MODIFIED GENETIC ALGORITHM IN CHABOCHE MODEL PARAMETERS IDENTIFICATION
Janeš, Gordan ; Car, Zlatan ; Puškarić, Miroslav
- 85-88
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=916847
2017.
ANTISTATIC WATER-SOLUBLE PAINTS
Zoubek, Michael ; Kudláček, Jan ; Kreibich, Viktor ; Matas, F. ; Car, Zlatan
- 271-274
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=916859
2017.
Running HPC applications on many million cores Cloud
Tomić, Draško; Car, Zlatan; Ogrizović, Dario;
MIPRO 2017-40th Jubilee International Convention on Information and Communication Technology, Electronics and Microelectronics
2016.
Study of influence of geometry, rotational speed and heat generated by wood cutting on vibrations of circular saw blade
Anđelić, Nikola; Car, Zlatan; Braut, Sanjin; Žigulić, Roberto;
International Conference on Innovative Technologies IN-TECH 2016
2016.
Modification on active magnetic bearings test-rig for implementing different control algorithms
Blažević, Sebastijan; Braut, Sanjin; Car, Zlatan; Žigulić, Roberto;
IN-TECH 2016 International Conference on Innovative Technologies
2015.
Optimizing the reference signal in the cross Wigner-Ville distribution based instantaneous frequency estimation method
Damir, Malnar; Victor, Sucic; Zlatan, Car;
Procedia Engineering - 100 1657-1664
2015.
A Compressive Sensing Based Method for Cross-Terms Suppression in the Time-Frequency Plane
Volarić, Ivan ; Sučić, Viktor ; Car, Zlatan
- 1-4
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=792898
2015.
Analysis of Corkscrew Electrode Failure Origins
Milanović, Željka ; Marasović, Ivan ; Saulig, Nicoletta ; Car, Zlatan
- -
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=776616
2015.
Optimizing the Reference Signal in the Cross Wigner-ville Distribution Based Instantaneous Frequency Estimation Method
Malnar, Damir ; Sučić, Viktor ; Car, Zlatan
- 1657-1664
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=767282
2015.
MPI applications' performances in native vs. virtualized environments using InfiniBand IPoIB virtualization and live migration
Kobal, Marko ; Car, Zlatan ; Ojsteršek, Milan
Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku - 22 1495-1503
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=797140
Q3 WOS
2014.
Accelerators on parallel roads to exascale computing
G. Janes, Z. Car, D. Ogrizovic
Proceedings of International Conference on I nnovative Technologies / Zlatan Car, Jan Kudláček, Joao Rafael (ur.). - Prag, : Faculty of Engineering University of Rijeka - 333-337
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=748556
2014.
The development, implementation and comparison of models of industrial robot using Modelica modeling language
Leon Šikulec, Mate Torlak, Zlatan Car
Proceedings of International Conference on Innovative Technologies / Zlatan Car, Jan Kudláček, Joao Rafael (ur.). - Prag, : Faculty of Engineering University of Rijeka - 329-333
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=748552
2014.
Scientific Applications in Cloud Computing
Ogrizović, Dario ; Car, Zlatan ; Kovačić, Božidar
The IPSI BgD Transactions on Advanced Research - 10 27-33
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=680600
2013.
Finite Analysis of Deep Drawing Tool Geometry for Thin Walled Tin Can
Kršulja, Marko ; Štefančić, Mauro ; Car, Zlatan ; Pepelnjak, Tomaž ; Plančak, Miroslav ; Vojkovský, Karel
International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.). - Rijeka : Faculty of Engineering University of Rijeka - 401-404
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=641978
2013.
Analyzing Anomalies of Injection Tooling Mold Design
Šikulec, Leon ; Perčić, Katja ; Plančak, Miroslav ; Car, Zlatan ; Kačmarčik, Igor ; Štrbac, Branko
International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.). - Rijeka : Faculty of Engineering University of Rijeka - 425-428
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=641981
2013.
A Fast Genetic Algorithm Based on Single Gene Evaluation Fitness Mechanism for Job-Shop Scheduling Problem
Janeš, Gordan ; Car, Zlatan ; Ogrizović, Dario
International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.). - Rijeka : Faculty of Engineering University of Rijeka - 345-348
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=642272
2013.
Doing Science in the Cloud
Ogrizović, Dario ; Car, Zlatan ; Janeš, Gordan ; Kovačić, Božidar
International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.). - Rijeka : Faculty of Engineering University of Rijeka - 385-388
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=642274
2013.
The New Wear-Resistant Coating Systems Containing Carbon Nanotubes
Zoubek, M. ; Kudláček, Jan ; Drašnar, Petr ; Herrmann, F. ; Valeš, M. ; Car, Zlatan
International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.). - Rijeka : Faculty of Engineering University of Rijeka - 173-176
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=641982
2013.
Experimental Testing of Exchangeable Cutting Inserts Cutting Ability
Čep, Robert ; Janásek, Adam ; Čepová, Lenka ; Petrů, Jana ; Hlavatý, Ivo ; Car, Zlatan ; Hatala, Michal
Tehnicki Vjesnik-Technical Gazette - 20 21-26
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=621217
WOS
2013.
Cloud Solutions for High Performance Computing: Oxymoron or Realm?
Tomić, Draško ; Ogrizović, Dario ; Car, Zlatan
Tehnicki Vjesnik-Technical Gazette - 20 177-182
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=611951
Q2 WOS
2013.
Zinc-Polytetrafluoroethylene (Zn-PTFE) Composite Coating with Exploitable Tribological Properties
Drasnar, Petr ; Kudláček, Jan ; Pepelnjak, Tomaž ; Car, Zlatan ; Pazderova, Martina
Journal of Engineering Technology - 30 30-36
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=646819
2012.
Forward Extrusion of Bi-metallic Components
Plančak, Miroslav ; Vilotić, Dragiša ; Car, Zlatan ; Movrin, Dejan ; Kačmarcik, Igor ; Kršulja, Marko
Proceedings of 4th International Scientific and Expert Conference of the International TEAM Society / Marija Živić ; Tomislav Galeta (ur.). - Grafika d.o.o., Osijek : Mechanical Engineering Faculty in Slavonski Brod, Josip Juraj Strossmayer University of Osijek and International TEAM Society - 125-128
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=599673
2012.
Automatic Measurement of Rotational Speeds and Lathe Maintenance
Jurjević, Marin ; Kršulja, Marko ; Katalinić, Branko ; Car, Zlatan ; Šikulec, Leon
Annals of DAAAM for 2012. & Proceedings of the 23rd International DAAAM Symposium / Katalinic, Branko (ur.). - Vienna : DAAAM International - 775-778
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=602459
2012.
Thin Metal Material TH 415 Composition Testing
Kršulja, Marko ; Barišić, Branimir. ; Pomenić, Loreta ; Car, Zlatan ; Šikulec, Leon.
13th International Scientific Conference Automation in Production Planning and Manufacturing / Kuric, Ivan (ur.). - Žilina : Scientific and Technical Society at the University of Žilina - 133-139
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=587961
2012.
Investigation of Single Point Incremental Forming Process Applied on Thin Sheet Metal
Kršulja, Marko ; Kuzman ; Karl ; Plančak, Miroslav ; Math Miljenko ; Car, Zlatan
International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.). - Rijeka : Faculty of Engineering University of Rijeka - 583-586
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=599508
2012.
Investigation of Coatings Friction Coefficient Used in Production of Deep Drawn Packaging Cans
Kršulja, Marko ; , Roškanin, Petr ; Kudláček, Jan ; Pomenić, Loreta ; Car, Zlatan
International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.). - Rijeka : Faculty of Engineering University of Rijeka - 443-446
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=597531
2012.
Investigation of Dry and Combined Method Used for Measurement and Maintenance Control of Liquid Storage Tank Capacity
Uravić, Valter ; Car, Zlatan ; Kršulja, Marko ; Šikulec, Leon ; Radelja, Hrvoje
Proceedings PLIN2012 / Raos, Pero (ur.). - Slavonski Brod : Strojarski fakultet u Slavonskom Brodu - 5-1-5-11
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=612616
2012.
Introduction of New Surface Treatment Technologies Into Practice - Zinc Based Composite Coating with PTFE Particles (Zn-PTFE Coating)
Drasnar, Petr: Kudláček, Jan ; Roskanin, Petr ; Pepelnjak, Tomaž ; Car, Zlatan ; Vales, M.
International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.). - Rijeka : Faculty of Engineering University of Rijeka - 339-342
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=597533
2012.
Mathematical Modelling of Surface Grease Deposits
Kudláček, Jan ; Chabera, Petr ; Pepelnjak, Tomaž ; Car, Zlatan ;
International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.). - Rijeka : Faculty of Engineering University of Rijeka - 335-338
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=597534
2012.
Concept for online web machine tool control based on open source
Radelja, Hrvoje ; Hasković, Damir ; Šikulec, Leon ; Plančak, Miroslav ; Kršulja, Marko ; Car, Zlatan
Proceedings of 8th International Conference of DAAAM Baltic INDUSTRIAL ENGINEERING / Otto, T. (ur.). - Tallinn : Tallinn University of Technology - 216-221
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=577670
2012.
An analysis of non-axisymmetric backward extrusion
Plančak, Miroslav ; Movrin, Dejan ; Vilotić, Dragiša ; Car, Zlatan ; Ivanišević, Aljoša ; Kačmarcik, Igor ;
Tehnicki Vjesnik-Technical Gazette - 19 953-957
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=607868
WOS
2012.
Possibilities to Measure Contact Friction in Bulk Metal Forming
Plančak, Miroslav ; Car, Zlatan ; Kršulja, Marko ; Vilotić, Dragiša ; Kačmarcik, Igor ; Movrin, Dejan
Tehnicki Vjesnik-Technical Gazette - 19 727-734
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=550627
WOS
2012.
Design and Planning of Clamping Work-holder Station for Sheet Metal Part of Car Body
Kršulja, Marko ; Mijić, Saša ; Barišić, Branimir ; Car, Zlatan
Výrobné inžinierstvo, The journal Manufacturing and Industrial Engineering - 11 38-43
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=583209
2012.
Behaviour of X5 CrNiMo 17-12-2 Material During Deep Drawing Process
Kršulja, Marko ; Car, Zlatan ; Radelja, Hrvoje
METALURGIJA - 51 203-206
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=544912
Q2 WOS
2012.
The Tribological Properties of ZN-PTFE Composite Coating
Drasnar, Petr; Kudlacek; Jan; Kreibich, Viktor; Roskanin, Petr; Vales, Miroslav; Car, Zlatan
Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici
2012.
Measurements Planing of Turbo Casing by the Use of AI for Data Clasification
Radelja, Hrvoje; Kršulja, Marko; Šikulec, Leon; Car, Zlatan
Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici - 2012
2012.
Introduction of New Surface Treatment Technologies Into Practice - Zinc Based Composite Coating with PTFE Particles (Zn-PTFE Coating)
Drasnar, Petr: Kudláček, Jan; Roskanin, Petr; Pepelnjak, Tomaž; Car, Zlatan; Vales, M.
International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.). - Rijeka : Faculty of Engineering University of Rijeka , 2012. 339-342 (ISBN: 978-953-6326-77-8).
2012.
Concept for online web machine tool control based on open source
Radelja, Hrvoje; Hasković, Damir; Šikulec, Leon; Plančak, Miroslav; Kršulja, Marko; Car, Zlatan
Proceedings of 8th International Conference of DAAAM Baltic INDUSTRIAL ENGINEERING / Otto, T. (ur.). - Tallinn : Tallinn University of Technology , 2012. 216-221 (ISBN: 978-9949-23-265-9).
2011.
Digitizing system ATOS - measuring turbo compressor housing
Bogović, Iva - Nicol ; Barišić, Branimir ; Katalinić, Branko ; Kršulja, Marko ; Car, Zlatan
Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.). - Vienna : DAAAM International Vienna - 1367-1368
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=544943
2011.
Comparison in Production Planning of the Classical Method and RL Advanced Algorithms
Šikulec, Leon ; Radelja, Hrvoje ; Kršulja, Marko ; Car, Zlatan
Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.). - Prag : Tisk AS, s.r.o., Jaroměř - 778-780
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=529401
2011.
Radioscopic measurement on fuel filter support: inspection for health of material
Despot, Veselka ; Barišić, Branimir ; Katalinić, Branko ; Kršulja, Marko ; Car, Zlatan ;
Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.). - Vienna : DAAAM International Vienna - 1359-1360
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=544960
2011.
Flatness of Mechanical Interface of Housing Filter: Comparing Methods
Hodak, Marko ; Barišić, Branimir ; Katalinić, Branko ; Kršulja, Marko ; Car, Zlatan
Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.). - Vienna : DAAAM International Vienna - 1381-1382
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=545405
2011.
Vehicle Beam Light Assistant System
Zenzerović, Paolo ; Car, Zlatan
- 1653-1654
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=564803
2011.
The Tribological Properties of Zn-PTFE Composite Coating
Drasnar, Petr ; Kudlaček, Jan ; Kreibich, Viktor ; Roskanin, Petr ; Pakosta, Michal ; Vales, Miroslav ; Car, Zlatan
International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.). - Prag : Tisk AS, s.r.o., Jaroměř - 142-146
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=529414
2011.
Considerations on the use of Ballbar System in Accuracy Assessment of the Triaxial CNC Machine Tool
Lazanja, Matej ; Barišić, Branimir ; Car, Zlatan
International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.). - Prag : Tisk AS, s.r.o., Jaroměř - 762-764
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=529404
2011.
Measurements Data Analysis and Defect Classification Using NN
Radelja, Hrvoje ; Kršulja, Marko ; Šikulec, Leon ; Car, Zlatan
Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.). - Prag : Tisk AS, s.r.o., Jaroměř - 770-772
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=529397
2011.
Suitable Devices for Measuring Roughness on Oil Filter Housing
Jurjević, Marin ; Barišić, Branimir ; Katalinić, Branko ; Kršulja, Marko ; Car, Zlatan ;
Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.). - Vienna : DAAAM International Vienna - 1351-1352
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=544980
2011.
Upsetting of Bimetallic Components in Closed Die
Plančak, Miroslav ; Car, Zlatan ; Vilotić, Dragiša ; Movrin, Dejan ; Kršulja, Marko
Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici - 31 105-109
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=548316
2011.
Comparative simulations of the heavy machining production system
Stanković, Igor ; Car, Zlatan, Barišić, Branimir
Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici - 31 1-11
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=546264
2011.
Accuracy Inspection of a Milling Machine with Ballbar System
Lazanja, Matej ; Barišić, Branimir ; Car, Zlatan ; Plančak, Miroslav
Journal ''CA Systems in production process Planning'' - 12 79-82
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=526489
2011.
Vehicle Beam Light Assistant System
Zenzerović, Paolo; Car, Zlatan
Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.). - Vienna : DAAAM International Vienna - 1653-1654
2010.
Analysis of Nonhomogeneous Yielding by Means of Different Intelligent System Based on Stochastic and Finite Element Method
Barišić, Branimir ; Miroslav, Plančak ; Car, Zlatan
Proceeding of The 14th Asia Pacific Symposium on Intelligent and Evolutionary Systems / Ohkura, Kazuhiro (ur.). - Hiroshima : Hiroshima University - 326-334
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=494226
2010.
Introduction of Scientific Cloud Concept for Industry Application
Car, Zlatan ; Dario, Ogrizović ; Branimir, Barišić, Katalinić, Branko
- 213-220
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=494229
2010.
Introduction of Scientific Cloud Concept for Industry Application
Car, Zlatan; Dario, Ogrizović; Branimir, Barišić, Katalinić, Branko
14th Asia Pacific Symposium on Intelligent and Evolutionary Systems : proceedings / Ohkura, Kazuhiro (ur.). - Hiroshima : Hiroshima University , 2010. 213-220 (ISBN: 978-4-9905470-0-4).
2009.
Creating Virtual Models of Production Equipment For Simulation of a Manufacturing Process System
Car, Zlatan ; Barišić, Branimir ; Kršulja, Marko
0th International Scientific Conference, Automation in Production Planning and Manufacturing / Kuric, Ivan (ur.). - Žilina : University of Žilina, Faculty of Mechanical Engineering - 38-44
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=404294
2009.
Application of Multi-Agent Technology and Heterarhical Architecture for Production Scheduling
Car, Zlatan ; Ohkura, Kazuhiro ; Barišić, Branimir
Engineering review : znanstveni Časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici - 29 1-10
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=404964
2009.
GA Based CNC Turning Center Exploitation Process Parameters Optimization
Car, Zlatan ; Barišić, Branimir ; Ikonić, Milan
Metalurgija - 48 47-50
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=370171
Q2 WOS
2009.
Emergent Synthesis Based Multi-Objective Design of the Manufacturing System Shop-Floor
Car, Zlatan ; Barišić, Branimir ; Rucki, Miroslaw
Strojniški vestnik - 55 523-530
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=456619
Q2 WOS
2008.
Evolutionary Based Production Planning
Sladić, Saša ; Car, Zlatan ; Barišić, Branimir
Proceedings of 9th International Scientific Conference "Automation in Production Planning and Manufacturing" / Ivan Kuric (ur.). - Zilina : University of Zilina - 252-258
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=403736
2008.
GA Based Design and Production Planing
Car, Zlatan ; Barišić, Branimir ; Sladic, Saša
Proceedings of the 9th International Scientific Conference ” New Ways in Manufacturing Technologies” / Karol Vasilko (ur.). - Prešov : Technical University Kosiciach - 15-19
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=403842
2008.
Considerations and Use of the Genetic Algorithm in Optimization of Standard Fixture Components
Kršulja, Marko ; Barišić, Branimir ; Car, Zlatan
The 19th International DAAAM SYMPOSIUM "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions" / Katalinić, Branko (ur.). - Vienna : DAAAM International Vienna - 731-732
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=404226
2008.
Analysis of Digitizing and Traditional Measuring System at Surface Measurement of Lids
Barišić, Branimir ; Rucki, Miroslaw ; Car, Zlatan
Key Engineering Materials - 381-382 217-221
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=335896
WOS
2008.
Analysis of Different Modeling Approach at Determining of Backward Extrusion Force on AlCu5PbBi Material
Barišić, Branimir ; Car, Zlatan ; Ikonić, Milan
Journal Metallurgy - 47 307-311
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=341959
WOS
2008.
New Trends in Intelligent Manufacturing
Maričić, Sven ; Car, Zlatan ; Ueda, Kanji
Engineering review : znanstveni casopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici - 28 91-100
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=380564
2008.
Investigation of Forming Force at Backward Extrusion Process on Different Aluminum Materials
Barišić, Branimir ; Ungureanu, Nicolae ; Car, Zlatan
Scientific Buleten Series C - XXII 21-27
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=458008
2008.
Multy Objective Evolutionary Based Scheduling
Car, Zlatan ; Barišić, Branimir ; Novak ; Jozef
Jourrnal Manufacturing Engineering - 7 47-51
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=403711
2008.
Machining center efficiency optimization based on evolutionary algorithm
Car, Zlatan; Barišić, Branimir; Kršulja, Marko
Metallurgy, vol. 47, no.3 / Ilija Mamuzić (ur.). - Zagreb : Hrvatsko Metalurško Društvo - 47
Q2 WOS
2008.
MATHEMATICAL MODELING, SIMULATION AND OPTIMIZATION OF BULK METAL FORMING PROCESS
Barišić, Branimir; Car, Zlatan; Kršulja, Marko; Ikonić, Milan
Metallurgy, vol.47, no.3, / Ilija Mamuzić (ur.). - Zagreb : Hrvatsko Metalurško Društvo , 2008. 269-269.
2008.
A Numerical Approach to the Establishment of a Sheet Metal Forming Process Technology
Barišić, Branimir; Ungureanu, Mioriţa; Car, Zlatan
Annals of the University of Petroşani-Mechanical Engineering (1454-9166) 10 (2008), 1; 11-22
2008.
Optimization of 3-2-1 clamping method in milling operations
Kršulja, Marko; Barišić, Branimir; Car, Zlatan
Metallurgy, vol. 47, no.3 / Mamuzić, Ilija (ur.). - Zagreb : Hrvatsko Metalurško Društvo , 2008. 270-270. - 47
2008.
CNC TURNING CENTER GA BASED OPTIMIZATION
Car, Zlatan; Barišić, Branimir; Ikonić, Milan
Metallurgy, Ilija Mamuzić (ur.). - Zagreb : Hrvatsko Metalurško Društvo - 47
2007.
Numerical Strategy for Ust 13 Sheet Metal DVD Holder Production
Barišić, Branimir ; Car, Zlatan ; Nastran Miha
6th International Conference on Industrial Tools and Materials Processing Technologies / Kuzman, Karl (ur.). - Celje : TECOS - 337-343
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=307369
2007.
Machining Center Efficiency Optimization Using Artificial Intelligence
Dusevic, Hrvoje: Car, Zlatan: Barišić, Branimir
Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium / B. Katalinic (ur.). - Vienna, Austria : DAAAM International - 132-133
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=325002
2007.
Evaluation of Different Analytic Models Accuracy at Backward Extrusion Force on AlCu5PbBi
Barišić, Branimir ; Car, Zlatan ; Kuzman, Karl
Proceedings of the 12th International Conference On Tools ICT-2007 / Dudas Illes, Szabo Otto, Varga Gyula (ur.). - Mišlolc : Department of Production Engineering-University of Miskolc - 287-293
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=335935
2007.
Machining Center Efficiency Optimization Using Artificial Intelligence
Dusevic, Hrvoje: Car, Zlatan: Barišić, Branimir
Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium / B. Katalinic (ur.). - Vienna, Austria : DAAAM International , 2007. 132-133 (ISBN: 3-901509-58-5).
2006.
Preliminary GA Based Optimization In Process Of Jig Design For Milling Processes
Barišić, Branimir ; Kršulja, Marko ; Car, Zlatan
Proceedings of the 17th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Mechatronics & Robotics" / Katalinic, B. (ur.). - Vienna : DAAAM International Vienna - 029-030-
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=274508
2006.
MES System Data Acquisition in Rolling Mill Plant Automation
Blažević, Dalibor ; Mikac, Tonči ; Car, Zlatan
- 287-290
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=284853
2006.
Utilization of GA for Optimization of Tool Path on a 2D Surface
Car, Zlatan ; Mikac, Tonči ; Veža, Ivica
Proceedings of the 6th International Workshop on Emergent Synthesis / Ueda, Kanji (ur.). - Tokyo : The University of Tokyo - 231-236
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=254464
2006.
Modern Organizational Concepts and Methods of Production Management
Ikonić, Milan ; Car, Zlatan ; Barišić, Branimir
ing Countries : ATDC 2006 / Mikac, Tonči ; Katalinić, Branko (ur.). - Rijeka ; Vienna : University of Rijeka, Faculty of Engineering ; DAAAM - 291-297
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=279512
2006.
New Method of Choosing the Optimal Organization Structure
Ikonić, Milan ; Mikac, Tonči ; Car, Zlatan
Proceedings of 6th International Workshop on Emergent Synthesis : IWES ´06 / Ueda, Kanji (ur.). - Tokyo : The University of Tokyo - 25-34
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=272424
2006.
Optimization Of Tool Motion On A 2-Dimensional Surface By Means Of The Genetic Algorithm
Crljenko, Domagoj ; Barišić, Branimir ; Car, Zlatan
- 159-164
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=273784
2006.
3D Measurements And Analysis Of Measuring Results For The Optical Eyepiece Holder
Haračić, Senad ; Barišić, Branimir ; Car, Zlatan
TPP 2006-Technological Process Planning / Legutko, S (ur.). - Poznan : Comitee of the Mechanical Engineering, Polish Academy of Science-Division Poznan - 111-117
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=284407
2006.
Stochastic Algorithm Application In Project Management For Limited Series Production
Maričić, Sven ; Barišić, Branimir ; Car, Zlatan
Proceedings of the 5th International DAAAM Conference "Advanced Technologies for Developing Countries" (ATDC 2006) / Mikac, T. ; Katalinić, Branko (ur.). - Rijeka : University of Rijeka, Faculty of Engineering - 281-286
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=272989
2006.
Evolutionary approach for solving cell-formation problem in cell manufacturing
Car, Zlatan ; Mikac, Tonči
Advanced Engineering Informatics - 20 227-232
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=274636
WOS
2006.
Modeling And Simulation Of Tinplate Container Lids Stamping Process
Car, Zlatan; Barišić, Branimir; Math, Miljenko Dino
Trends in the Development of Machinery and Associated Technology / Ekinović, S. ; Vivancos, J. ; Yalcin, S. (ur.). - Barcelona-Lloret de Mar : Escola Tecnica Superior D Enginyeria Industrial de Barcelona ; Faculty of Mechanical Engineering in Zenica ; Bahcesehir University Istanbul , 2006. 173-176 (ISBN: 995861730-7).
2006.
Example of 3D Measurements and Analysis the Optical Eyepiece Holder
Haračić, Senad; Barišić, Branimir; Car, Zlatan
2005.
Computer Simulation of Hollow Tinplate Part Manufacturing
Barišić, Branimir ; Car, Zlatan ; Mikac, Tonči, Ikonić, Milan
Proceedings of 6th International Scientific-Technical Conference Automation and CA Systems in Technology Planning and in Manufacturing / Novak-Marcincin, Josef (ur.). - Herlany : TU Košice - 16-20
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=245051
2005.
Multi-Agent Manufacturing System Design Based on Emergent Synthesis Approach
Car, Zlatan ; Mikac, Tonči
AMST'05 Advanced Manufacturing Systems and Technology: Proceedings of the Seventh International Conference / Kuljanić, Elso (ur.). - Udine : Springer-Verlag - 307-316
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=245409
2005.
Strain Energy Approach In Stamping Process Design
Ikonić, Milan ; Barišić, Branimir ; Car, Zlatan
Journal of Manufacturing Engineering - 4 79-81
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=245203
2005.
Evolutionary Computation Based Design and Reconfiguration of Shop-Floor Layout
Barišić, Branimir; Car, Zlatan; Mikac, Tonči
Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries / Milan Kljajin, Branko Katalinic, Ivan Budic (ur.). - Vienna : DAAAM International Vienna , 2005. 361-366 (ISBN: 953-6048-29-9).
2004.
Reconfiguration of Manufacturing Systems Based on Virtual BMS
Car, Zlatan ; Hatono, Itsuo ; Ueda, Kanji
CIRP Journal of Manufacturing Systems - 33 15-24
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=245373
2003.
Multi-objective Design and Adaptable Reconfiguration of the Manufacturing System Shop-floor
Car, Zlatan ; Hatono, Itsuo ; Ueda, Kanji
Progres in Virtual Manufacturing Systems, Proceedings of The 36th CIRP International Seminar on Manufacturing Systems / Prof. Dr.-Ing. Helmut Bley (ur.). - Saarbrucken : Published by CIRP ISMS - 493-500
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=245376
2003.
Stochastic and Genetic Algorithm Comparison for Production Scheduling in a Flexible Manufacturing System
Maričić, Sven ; Barišić, Branimir ; Car, Zlatan
Engineering Review - 23 31-44
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=288266
Books
2015.
Proceedings of International Conference on I nnovative Technologies, IN-TECH 2015
Urednik
Car, Zlatan ; Kudláček, Jan
Faculty of Engineering University of Rijeka
2014.
Proceedings of International Conference on I nnovative Technologies, IN-TECH 2014
Urednik
Zlatan Car, Jan Kudláček, Joao Rafael da Costa Sanches Galvao
Faculty of Engineering University of Rijeka
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=748560
2013.
Proceedings of International Conference on Innovative Technologies IN-TECH 2013
Urednik
Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor
Faculty of Engineering University of Rijeka
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=641979
2012.
Proceedings of International Conference on Innovative Technologies IN-TECH 2012
Urednik
Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž
Faculty of Engineering University of Rijeka
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=597539
2011.
Proceedings of International Conference on Innovative Technologies IN-TECH 2011
Urednik
Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko
Tisk AS, s.r.o., Jaroměř
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=529725
2006.
Example of 3D Measurements and Analysis the Optical Eyepiece Holder
Autor poglavlja u knjizi
Haračić, Senad ; Barišić, Branimir ; Car, Zlatan
Legutko, Stanislaw
Poznan University of Technology
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=288235
Invited Lectures
20.09.2021.
Relationship between University and Industry: partners in education and business
Zlatan Car
Sunny Beach, Bulgaria
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=548956
Orbital Forging of Cross Joint Component
Plančak, Miroslav; Movrin, Dejan; Car, Zlatan; Durakbasa N.; Vilotić, Dragiša
26-29.09.2012
BI-Metallic Cold Backward Extrusion – Numerical Simulation with Experimental Verification
Plančak, Miroslav ; Movrin, Dejan ; Car, Zlatan ; Dragiša Vilotić ; Kacmarcik, Igor ; Kršulja, Marko
Rijeka, Hrvatska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=597528
1-3.09.2011
Simulation of Product Logistic, Investigation of Facility Layout Capabilities
Kršulja, Marko ; Cukor, Goran ; Car, Zlatan
Bratislava, Slovačka
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=529974
10.09-13.09
Orbital Forging of Cross Joint Component
Plančak, Miroslav ; Movrin, Dejan ; Car, Zlatan ; Durakbasa N. ; Vilotić, Dragiša
Budimpešta
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=641984
Conference Presentations
23.06.2008.
Analysis of Different Modeling Approach at Determining of Backward Extrusion Force on AlCu5PbBi Material
Barišić, Branimir ; Car, Zlatan ; Ikonić, Milan
Predavanje
Međunarodni simpozij Hrvatskog metalurškog društva (8 ; 2008) Šibenik, Hrvatska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=360594
2008.
CNC TURNING CENTER GA BASED OPTIMIZATION
Car, Zlatan ; Barišić, Branimir ; Ikonić, Milan
Predavanje
SYMPOSIUM OF CROATIAN METALURGICAL SOCIETY/ SIMPOZIJ HRVATSKOG METALURŠKOG DRUŠTVA Šibenik, Hrvatska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=360606
2008.
MATHEMATICAL MODELING, SIMULATION AND OPTIMIZATION OF BULK METAL FORMING PROCESS
Barišić, Branimir ; Car, Zlatan ; Kršulja, Marko ; Ikonić, Milan
Predavanje
SYMPOSIUM OF CROATIAN METALURGICAL SOCIETY SIMPOZIJ HRVATSKOG METALURŠKOG DRUŠTVA Šibenik, Hrvatska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=360589
2008.
Optimization of 3-2-1 clamping method in milling operations
Kršulja, Marko ; Barišić, Branimir ; Car, Zlatan
Predavanje
Simpozij Hrvatskog Metalurškog Društva Šibenik, Hrvatska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=426473
2008.
Machining center efficiency optimization based on evolutionary algorithm
Car, Zlatan ; Barišić, Branimir ; Kršulja, Marko
Predavanje
Simpozij Hrvatskog Metalurškog Društva/Simposium of Croatian Metalurgical society Šibenik, Hrvatska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=426482
2008.
Analysis of different modeling approach at determining of backward extrusion force on AlCu5PbBi material
Kršulja, Marko ; Barišić, Branimir ; Car, Zlatan
Predavanje
Simpozij Hrvatskog Metalurškog Društva Šibenik, Hrvatska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=426478
2006.
Modeling And Simulation Of Tinplate Container Lids Stamping Process
Car, Zlatan ; Barišić, Branimir ; Math, Miljenko Dino
Poster
10th International Research/Expert Conference - “ ; Trends in the Development of Machinery and Associated Technology” ; - TMT 2006 Barcelona - Lloret de Mar, Španjolska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=272248
2005.
Analytical, Numerical, and Experimental Modeling and Simulation of Backward Extrusion Force on AlMgSi 1
Barišić, Branimir ; Car, Zlatan ; Cukor, Goran ; Mikac, Tonči
Poster
ICIT 2005 - 5th international conference on industrial tools Velenje, Slovenija
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=245063
2005.
Evolutionary Computation Based Design and Reconfiguration of Shop-Floor Layout
Barišić, Branimir ; Car, Zlatan ; Mikac, Tonči
Poster
Danube Adria Association for Automation and Manufacturing International Conference on Advanced Technologies for Developing Countries Slavonski Brod, Hrvatska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=245211
2005.
Evolutionary Computation Based Multi-Objective Reconfiguration Of Shop-Floor Layout
Car, Zlatan ; Barišić, Branimir ; Mikac, Tonči
Poster
CIM 2005 : Computer Intergrated Manufacturing and High Speed Machining / [10th International Scientific Conference on Production Engineering Lumbarda, Hrvatska
Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=245220
Machining center efficiency optimization based on evolutionary algorithm
Car, Zlatan; Barišić, Branimir; Kršulja, Marko
Analytical, Numerical, and Experimental Modeling and Simulation of Backward Extrusion Force on AlMgSi 1
Barišić, Branimir; Car, Zlatan; Cukor, Goran; Mikac, Tonči
Evolutionary Computation Based Multi-Objective Reconfiguration Of Shop-Floor Layout
Car, Zlatan; Barišić, Branimir; Mikac, Tonči
Analysis of Different Modeling Approach at Determining of Backward Extrusion Force on AlCu5PbBi Material
Barišić, Branimir; Car, Zlatan; Ikonić, Milan
CNC TURNING CENTER GA BASED OPTIMIZATION
Car, Zlatan; Barišić, Branimir; Ikonić, Milan
Optimization of 3-2-1 clamping method in milling operations
Kršulja, Marko; Barišić, Branimir; Car, Zlatan
Analysis of different modeling approach at determining of backward extrusion force on AlCu5PbBi material
Kršulja, Marko; Barišić, Branimir; Car, Zlatan
Modern Organizational Concepts and Methods of Production Management
Ikonić, Milan; Car, Zlatan; Barišić, Branimir
Radioscopic measurement on fuel filter support: inspection for health of material
Despot, Veselka; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan;
Investigation of Dry and Combined Method Used for Measurement and Maintenance Control of Liquid Storage Tank Capacity
Uravić, Valter; Car, Zlatan; Kršulja, Marko; Šikulec, Leon; Radelja, Hrvoje
Investigation of Coatings Friction Coefficient Used in Production of Deep Drawn Packaging Cans
Kršulja, Marko; , Roškanin, Petr; Kudláček, Jan; Pomenić, Loreta; Car, Zlatan
Investigation of Coatings Friction Coefficient Used in Production of Deep Drawn Packaging Cans
Kršulja, Marko; , Roškanin, Petr; Kudláček, Jan; Pomenić, Loreta; Car, Zlatan
Analyzing Anomalies of Injection Tooling Mold Design
Šikulec, Leon; Perčić, Katja; Plančak, Miroslav; Car, Zlatan; Kačmarčik, Igor; Štrbac, Branko
MES System Data Acquisition in Rolling Mill Plant Automation
Blažević, Dalibor; Mikac, Tonči; Car, Zlatan
GA Based Design and Production Planing
Car, Zlatan; Barišić, Branimir; Sladic, Saša
Comparison in Production Planning of the Classical Method and RL Advanced Algorithms
Šikulec, Leon; Radelja, Hrvoje; Kršulja, Marko; Car, Zlatan
Considerations on the use of Ballbar System in Accuracy Assessment of the Triaxial CNC Machine Tool
Lazanja, Matej; Barišić, Branimir; Car, Zlatan
Evolutionary Computation Based Multi-Objective Reconfiguration Of Shop-Floor Layout
Car, Zlatan; Barišić, Branimir; Mikac, Tonči
Evolutionary Computation Based Design and Reconfiguration of Shop-Floor Layout
Barišić, Branimir; Car, Zlatan; Mikac, Tonči
Analytical, Numerical, and Experimental Modeling and Simulation of Backward Extrusion Force on AlMgSi 1
Barišić, Branimir; Car, Zlatan; Cukor, Goran; Mikac, Tonči
Optimization Of Tool Motion On A 2-Dimensional Surface By Means Of The Genetic Algorithm
Crljenko, Domagoj; Barišić, Branimir; Car, Zlatan
Computer Simulation of Hollow Tinplate Part Manufacturing
Barišić, Branimir; Car, Zlatan; Mikac, Tonči, Ikonić, Milan
New Method of Choosing the Optimal Organization Structure
Ikonić, Milan; Mikac, Tonči; Car, Zlatan
3D Measurements And Analysis Of Measuring Results For The Optical Eyepiece Holder
Haračić, Senad; Barišić, Branimir; Car, Zlatan
Utilization of GA for Optimization of Tool Path on a 2D Surface
Car, Zlatan; Mikac, Tonči; Veža, Ivica
Preliminary GA Based Optimization In Process Of Jig Design For Milling Processes
Barišić, Branimir; Kršulja, Marko; Car, Zlatan
Machining Center Efficiency Optimization Using Artificial Intelligence
Dusevic, Hrvoje: Car, Zlatan: Barišić, Branimir
Numerical Strategy for Ust 13 Sheet Metal DVD Holder Production
Barišić, Branimir; Car, Zlatan; Nastran Miha
Evaluation of Different Analytic Models Accuracy at Backward Extrusion Force on AlCu5PbBi
Barišić, Branimir; Car, Zlatan; Kuzman, Karl
Considerations and Use of the Genetic Algorithm in Optimization of Standard Fixture Components
Kršulja, Marko; Barišić, Branimir; Car, Zlatan
Creating Virtual Models of Production Equipment For Simulation of a Manufacturing Process System
Car, Zlatan; Barišić, Branimir; Kršulja, Marko
Evolutionary Based Production Planning
Sladić, Saša; Car, Zlatan; Barišić, Branimir
Analysis of Nonhomogeneous Yielding by Means of Different Intelligent System Based on Stochastic and Finite Element Method
Barišić, Branimir; Miroslav, Plančak; Car, Zlatan
Introduction of Scientific Cloud Concept for Industry Application
Car, Zlatan; Dario, Ogrizović; Branimir, Barišić, Katalinić, Branko
Vehicle Beam Light Assistant System
Zenzerović, Paolo; Car, Zlatan
Measurements Data Analysis and Defect Classification Using NN
Radelja, Hrvoje; Kršulja, Marko; Šikulec, Leon; Car, Zlatan
Suitable Devices for Measuring Roughness on Oil Filter Housing
Jurjević, Marin; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan;
Flatness of Mechanical Interface of Housing Filter: Comparing Methods
Hodak, Marko; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan
A Fast Genetic Algorithm Based on Single Gene Evaluation Fitness Mechanism for Job-Shop Scheduling Problem
Janeš, Gordan; Car, Zlatan; Ogrizović, Dario
Concept for online web machine tool control based on open source
Radelja, Hrvoje; Hasković, Damir; Šikulec, Leon; Plančak, Miroslav; Kršulja, Marko; Car, Zlatan
Forward Extrusion of Bi-metallic Components
Plančak, Miroslav; Vilotić, Dragiša; Car, Zlatan; Movrin, Dejan; Kačmarcik, Igor; Kršulja, Marko
Digitizing system ATOS - measuring turbo compressor housing
Bogović, Iva - Nicol; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan
Automatic Measurement of Rotational Speeds and Lathe Maintenance
Jurjević, Marin; Kršulja, Marko; Katalinić, Branko; Car, Zlatan; Šikulec, Leon
Doing Science in the Cloud
Ogrizović, Dario; Car, Zlatan; Janeš, Gordan; Kovačić, Božidar
Finite Analysis of Deep Drawing Tool Geometry for Thin Walled Tin Can
Kršulja, Marko; Štefančić, Mauro; Car, Zlatan; Pepelnjak, Tomaž; Plančak, Miroslav; Vojkovský, Karel
A Fast Genetic Algorithm Based on Single Gene Evaluation Fitness Mechanism for Job-Shop Scheduling Problem
Janeš, Gordan; Car, Zlatan; Ogrizović, Dario
Relationship between University and Industry: partners in education and business
Zlatan Car
Introduction of New Surface Treatment Technologies Into Practice - Zinc Based Composite Coating with PTFE Particles (Zn-PTFE Coating)
Drasnar, Petr: Kudláček, Jan; Roskanin, Petr; Pepelnjak, Tomaž; Car, Zlatan; Vales, M.
The New Wear-Resistant Coating Systems Containing Carbon Nanotubes
Zoubek, M.; Kudláček, Jan; Drašnar, Petr; Herrmann, F.; Valeš, M.; Car, Zlatan
Investigation of Single Point Incremental Forming Process Applied on Thin Sheet Metal
Kršulja, Marko; Kuzman; Karl; Plančak, Miroslav; Math Miljenko; Car, Zlatan
Thin Metal Material TH 415 Composition Testing
Kršulja, Marko; Barišić, Branimir.; Pomenić, Loreta; Car, Zlatan; Šikulec, Leon.
Stochastic and Genetic Algorithm Comparison for Production Scheduling in a Flexible Manufacturing System
Maričić, Sven; Barišić, Branimir; Car, Zlatan
CNC TURNING CENTER GA BASED OPTIMIZATION
Car, Zlatan; Barišić, Branimir; Ikonić, Milan
MATHEMATICAL MODELING, SIMULATION AND OPTIMIZATION OF BULK METAL FORMING PROCESS
Barišić, Branimir; Car, Zlatan; Kršulja, Marko; Ikonić, Milan
Modeling And Simulation Of Tinplate Container Lids Stamping Process
Car, Zlatan; Barišić, Branimir; Math, Miljenko Dino
Analysis of Different Modeling Approach at Determining of Backward Extrusion Force on AlCu5PbBi Material
Barišić, Branimir; Car, Zlatan; Ikonić, Milan
Multi-objective Design and Adaptable Reconfiguration of the Manufacturing System Shop-floor
Car, Zlatan; Hatono, Itsuo; Ueda, Kanji
Multi-Agent Manufacturing System Design Based on Emergent Synthesis Approach
Car, Zlatan; Mikac, Tonči
Stochastic Algorithm Application In Project Management For Limited Series Production
Maričić, Sven; Barišić, Branimir; Car, Zlatan
2020
Bladder Cancer Recognition Using SIFT and SURF Features
Musulin, Jelena; Smolić, Klara; Car, Zlatan;
2020
Fault Detection in Robotic Manipulators using Support Vector Machines
Šegota, Sandi Baressi; Anđelić, Nikola; Mrzljak, Vedran; Car, Zlatan;
2020
Diagnostic of Bladder Cancer Using Hybrid Neural Networks Based on Edge Detectors
Lorencin, Ivan; Španjol, Josip; Gršković, Antun; Car, Zlatan;
2020
Forecasting Stock Index Movement Using Stationary Wavelet Transform and Long Short-Term Memory network
Štifanić, Daniel; Miočević, Adrijana; Car, Zlatan;
Mentoring doctoral students
2009. - 2015.
Procjena kompleksnosti nestacionarnih signala zasnovana na Rényijevoj entropiji
Nicoletta Saulig Doctorate
Poslijediplomski doktorski studij
Date of degree: 11. 6. 2015.
2008. - 2013.
Unaprjeđenje procesa inkrementalnog preoblikovanja u jednoj točki
Marko Kršulja Doctorate
Tehnički fakultet - Proizvodno strojarstvo
Date of degree: 02.09.2013.
Organisation of Conferences and Symposia
Journal Editor
2013. -
Proceedings of International Conference on Innovative Technologies IN-TECH 2013
2012. -
Proceedings of International Conference on Innovative Technologies IN-TECH 2012
2011. -
Proceedings of International Conference on Innovative Technologies IN-TECH 2011
Projects
Research Projects
02.01.2007. - 31.12.2013.
Numerical modeling, simulation and optimization in plate forming
Voditelj projekta
Croatian Ministry of education, science and sports
02.01.2007. - 31.12.2013.
Modeling of advanced production structures in intelligent manufacturing
Suradnik na projektu
Croatian Ministry of education, science and sports
01.04.2002. - 01.04.2007.
BSE detection by NIRS – Biotechnology project
Suradnik na projektu
project from national intereJapanese Ministry of education, culture, sports, science and technology 1 Mil USD
01.04.1997. - 01.04.2002.
Methodology of Emergent Synthesis" in the Research for the Future Program of JSPS (Japan Society for the Promotion of Science)
Suradnik na projektu
Japan Society for the Promotion of Science 1,5 Mil USD
Research Projects - Project Leader/Principal Investigato
Prof.dr.sc.Zlatan Cardipl.ing.str.
Centar kompetencija za pametne gradove
Technical sciences
Prof.dr.sc.Zlatan Cardipl.ing.str.
Development of an intelligent expert system for online bladder cancer diagnosis
Technical sciences
Prof.dr.sc.Zlatan Cardipl.ing.str.
Razvoj Cloud Manufacturing inteligentnih sustava za nadzor, vođenje i automatizaciju proizvodnog procesa
Technical sciences