PORTFELJ / izv. prof. dr. sc. Sanjin Kršćanski dipl. ing.

Portfelj

izv. prof. dr. sc.

Sanjin Kršćanski

dipl. ing.

Tehnički fakultet

Zavod za tehničku mehaniku

Kontakt

T +385 51 651 560

UNIRI e-mail

e-mail 1

PROSTORIJA 2-137

Vidljivost

Obrazovanje

01.07.2007. - 14.10.2013.

Doktor tehničkih znanosti

Poslijediplomski doktorski studij iz tehničkih znanosti

Tehnički fakultet, Rijeka

01.10.1998. - 14.06.2006.

Diplomirani inženjer strojarstva

Sveučilišni studij strojarstva

Tehnički fakultet, Rijeka

01.09.1994. - 20.05.1998.

Tehnološki tehničar

Tehnološki tehničar

Tehnička škola za stroarstvo i brodogradnju, Rijeka

Članstva

2008. -

Hrvatsko društvo za mehaniku

Nastavna djelatnost

Kolegiji

1.10.2020. -

Cjelovitost konstrukcija

Poslijediplomski doktorski studij

Tehnički fakultet

nositelj

1.10.2019. - 1.10.2020.

MKE i optimizacija konstrukcija

Poslijediplomski doktorski studij

Tehnički fakultet

nositelj

1.10.2018. -

Mehanika i elementi konstrukcija

Sveučilišni preddiplomski studij elektrotehnike

Tehnički fakultet

Profesor/nositelj kolegija

1.10.2018. -

Čvrstoća

Stručni preddiplomski studij strojarstva i brodogradnje

Tehnički fakultet

Profesor/nositelj kolegija

01.10.2017. - 01.10.2019.

Čvrstoća konstrukcija II

Diplomski sveučilišni studij strojarstva

Tehnički fakultet

Profesor/nositelj kolegija

01.10.2016. -

Trajnost strojeva i konstrukcija

Diplomski sveučilišni studij strojarstva

Tehnički fakultet

Profesor/nositelj kolegija

01.10.2016. -

Mehanika I

Preddiplomski stručni studij strojarstva i brodogradnje

Tehnički fakultet

Profesor/nositelj kolegija

01.10.2014. - 01.10.2022.

Čvrstoća konstrukcija II

Diplomski sveučilišni studij strojarstva

Tehnički fakultet

suradnik

01.10.2007. - 01.10.2019.

Čvrstoća konstrukcija I (Nauka o čvrstoći I)

Preddiplomski sveučilišni studij strojarstva

Tehnički fakultet

suradnik

01.10.2007. - 30.09.2017.

Čvrstoća

Preddiplomski stručni studij strojarstva i brodogradnje

Tehnički fakultet

suradnik

01.10.2007. - 01.10.2016.

Mehanika I

Preddiplomski stručni studij strojarstva i brodogradnje

Tehnički fakultet

suradnik

01.10.2007. -

Statika

Preddiplomski sveučilišni studij strojarstva

Tehnički fakultet

suradnik

Osobni razvoj

23.9.2017. - 30.9.2017.

School of Materials Science and Engineering

5.2.2016. - 5.2.2016.

7th International ConSteel Workshop

3.9.2010. - 3.1.2011.

ERASMUS

18.2.2010. - 19.2.2010.

Non-linear Steel Structural Analysis with LS-DYNA Software, TEMPUS/ASDEPP Program

7.7.2008. - 11.7.2008.

Damage mechanics and micromechanics of localized fracture phenomena in inelastic solids

3.3.2008. - 14.3.2008.

Fatique Reliability and Rational Inspection Planning, TEMPUS/ASDEPP Program

Znanstvena djelatnost

Znanstveni radovi

2023.

Testing and Analysis of Uniaxial Mechanical Fatigue, Charpy Impact Fracture Energy and Microhardness of Two Low-Carbon Steels

Josip Brnić, Sebastian Baloš, Marino Brčić, Miroslav Dramićanin, Sanjin Kršćanski, Mladomir Milutinović, Biao Ding, Zeng Gao

Materials - 16 884

https://www.mdpi.com/1996-1944/16/2/884

Q2 WOS

2021.

Virtual Crack Closure as a Method for Calculating Stress Intensity Factor of Cracks in Metallic Specimens

Kršćanski, Sanjin ; Brnić, Josip

Materials Design and Applications III - 29-45

2021.

Comparison of responses of different types of steel alloys under the same loading and environmental conditions

Brnić, Josip ; Kršćanski, Sanjin ; Brčić, Marino

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications - 235 1194-1202

Q2 WOS

2021.

Rotating Bending Fatigue Analysis of Printed Specimens from Assorted Polymer Materials

Brčić, Marino ; Kršćanski, Sanjin ; Brnić, Josip

Polymers - 13 11

Q1 WOS

2021.

S235JRC+C Steel Response Analysis Subjected to Uniaxial Stress Tests in the Area of High Temperatures and Material Fatigue

Brnić, Josip ; Brčić, Marino ; Baloš, Sebastian ; Vukelić, Goran ; Kršćanski, Sanjin ; Milutinović, Mladen ; Dramićanin, Miroslav

Sustainability - 13 16

Q1 WOS

2020.

Mechanical Behavior Analysis of Stainless Steels Subjected to Uniaxial Stress Tests

Brnić, Josip ; Kršćanski, Sanjin ; Brčić, Marino

IOP conference series. Materials science and engineering - 840 6

2020.

Prediction of Fatigue Crack Growth in Metallic Specimens under Constant Amplitude Loading Using Virtual Crack Closure and Forman Model

Kršćanski, Sanjin ; Brnić, Josip

Metals - 10 14

Q1 WOS

2020.

Deformation Behavior of C15E + C Steel under Different Uniaxial Stress Tests

Brnić, Josip ; Brčić, Marino ; Kršćanski, Sanjin ; Niu, Jitai ; Chen, Sijie ; Gao, Zeng

Metals - 10 19

Q1 WOS

2019.

Analysis of the mechanical response of materials used in design for highly stressed components

Brnić, Josip ; Kršćanski, Sanjin ; Brčić, Marino

IOP conference series. Materials science and engineering - 625 5

2019.

Reliable experimental data as a key factor for design of mechanical structures

Brnić, Josip ; Kršćanski, Sanjin ; Brčić, Marino ; Geng, Lin ; Niu, Jitai ; Ding, Biao

Structural Engineering and Mechanics, An International Journal - 72 245-256

Q1 WOS

2019

Considerations relating to the behavior of steel alloys of similar industrial applications

Brnić, Josip; Brčić, Marino; Kršćanski, Sanjin;

The 9th International Conference on Physical and Numerical Simulation of Materials Processing (9th ICPNS)

2019.

Analysis of Materials of Similar Mechanical Behavior and Similar Industrial Assignment

Brnic, Josip; Brcic, Marino; Krscanski, Sanjin; Canadija, Marko; Niu, Jitai;

Procedia Manufacturing - 37 207-213

Q2

2019.

Reliable experimental data as a key factor for design of mechanical structures

Brnic, Josip; Krscanski, Sanjin; Brcic, Marino; Geng, Lin; Niu, Jitai; Ding, Biao;

Structural Engineering and Mechanics - 72 105-116

Q1 WOS Q1

2019.

Analysis of the mechanical response of materials used in design for highly stressed components

Brnic, Josip; Krscanski, Sanjin; Brcic, Marino;

IOP Conference Series: Materials Science and Engineering - 625 012003

2019.

Uniaxial fatigue, creep and stress-strain responses of steel 30CrNiMo8

Brnic, Josip; Brcic, Marino; Krscanski, Sanjin; Lanc, Domagoj; Chen, Sijie;

Steel and Composite Structures - 31 409-417

Q1 WOS Q1

2018.

Steel 51CrV4 under high temperatures, short- time creep and high cycle fatigue

Brnić, Josip ; Brčić, Marino ; Kršćanski, Sanjin ; Lanc, Domagoj ; Niu, Jitai ; Wang, Peng

Journal of constructional steel research - 147 468-476

Q1 WOS

2018.

Comparison of the mechanical behavior of materials subjected to specific operating conditions

Brnic, J; Krscanski, S; Brcic, M;

IOP Conference Series: Materials Science and Engineering - 378 012007

2018.

Steel 51CrV4 under high temperatures, short-time creep and high cycle fatigue

Brnic, Josip; Brcic, Marino; Krscanski, Sanjin; Lanc, Domagoj; Niu, Jitai; Wang, Peng;

Journal of Constructional Steel Research - 147 468-476

Q1 WOS

2017.

Analysis of the Mechanical Behavior, Creep Resistance and Uniaxial Fatigue Strength of Martensitic Steel X46Cr13

Brnić, Josip ; Kršćanski, Sanjin ; Lanc, Domagoj ; Brčić, Marino ; Turkalj, Goran ; Čanađija, Marko ; Niu, Jitai

Materials - 10 388-406

Q1 WOS WOS

2017.

Uniaxial Properties versus Temperature, Creep and Impact Energy of an Austenitic Steel

Brnić, Josip ; Turkalj, Goran ; Kršćanski, Sanjin ; Vukelić, Goran ; Čanađija, Marko

High temperature materials and processes - 36 135-143

Q3 WOS WOS

2016.

Short-Time Creep, Fatigue and Mechanical Properties of 42CrMo4 - Low Alloy Structural Steel

Brnić, Josip ; Čanađija, Marko ; Turkalj, Goran ; Kršćanski, Sanjin ; Lanc, Domagoj ; Brčić, Marino ; Zeng, Gao

Steel and composite structures - 22 875-888

Q1 WOS WOS

2016.

Mechanical Properties, Short Time Creep and Fatigue of an Austenitic Steel

Brnić, Josip ; Turkalj, Goran ; Čanađija, Marko ; Lanc, Domagoj ; Kršćanski, Sanjin ; Brčić, Marino ; Li, Qiang ; Niu, Jitai

Materials - 9 298-1-298-19

Q1 WOS WOS

2016.

Changes in the Material Properties of Steel 1.4762 Depending on the Temperature

Brnić, Josip ; Turkalj, Goran ; Kršćanski, Sanjin ; Niu, Jitai ; Li, Qiang

High temperature materials and processes - 35 761-767

Q4 WOS WOS

2015.

Deformation Behavior and Material Properties of Austenitic Heat - Resistant Steel X15CrNiSi25-20 Subjected to High Temperatures and Creep

Brnić, Josip ; Turkalj, Goran ; Čanađija, Marko ; Kršćanski, Sanjin ; Brčić, Marino ; Lanc, Domagoj

Materials & design - 69 219-229

Q1 WOS WOS

2014.

Information relevant for the design of structure : Ferritic – Heat resistant high chromium steel X10CrAlSi25

Brnić, Josip ; Turkalj, Goran ; Kršćanski, Sanjin ; Lanc, Domagoj ; Čanađija, Marko ; Brčić, Marino

Materials and design - 63 508-518

Q1 WOS WOS

2013.

Comparison of Material Properties and Creep Behavior of 20MnCr5 and S275JR Steels

Brnić, Josip ; Niu, Jitai ; Turkalj, Goran ; Čanađija, Marko ; Lanc, Domagoj ; Brčić, Marino ; Kršćanski, Sanjin ; Vukelić, Goran

Materials Science Forum - 762 47-54

Q3 WOS Q3

2013.

Experimental Research and Analysis of Non-alloy Structural Steel Response Exposed to High Temperature Conditions

Brnić, Josip ; Turkalj, Goran ; Kršćanski, Sanjin

High temperature materials and processes - 32 163-169

Q3 WOS WOS

2012.

FEM stress concentration factors for fillet welded CHS-plate T-joint

Kršćanski, Sanjin ; Turkalj, Goran

Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici - 32 147-155

Q4 WOS Q4

2012.

Responses of Austenitic Stainless Steel American Iron and Steel Institute (AISI) 303 (1.4305) Subjected to Different Environmental Conditions

Brnić, Josip ; Turkalj, Goran ; Čanađija, Marko ; Lanc, Domagoj ; Kršćanski, Sanjin

Journal of testing and evaluation - 40 319-328

Q2 WOS WOS

2011.

Martensitic Stainless Steel AISI 420 – Mechanical Properties, Creep and Fracture Toughness

Brnić, Josip ; Turkalj, Goran ; Čanađija, Marko ; Lanc, Domagoj ; Kršćanski, Sanjin

Mechanics of time-dependent materials - 15 341-352

Q1 WOS WOS

2010.

Finite Element Analysis of Crack Size Effect on Fracture Criterion as a Measure of Fracture Toughness of Pressure Vessel Materials

Vukelić, Goran ; Brnić, Josip ; Kršćanski, Sanjin

The Sixth International Conference on Physical and Numerical Simulation of Materials Processing, Guilin, China - -

2009.

FE modelling of multi-walled carbon nanotubes

Brčić, Marino ; Čanađija, Marko ; Brnić, Josip ; Lanc, Domagoj ; Kršćanski, Sanjin ; Vukelić, Goran

Estonian Journal of Engineering - 15 77-86

Preuzeto sa:https://bib.irb.hr/prikazi-rad?&rad=423172

2009.

A numerical analysis of the behaviour of a vehicle model with driver’s seat at the road bump

Žigulić, Roberto ; Kršćanski, Sanjin ; Braut, Sanjin

Transactions of FAMENA - 33 19-30

WOS Q4 WOS

2008.

Structural model of multi walled carbon nanotube

Brčić, Marino ; Čanađija, Marko ; Brnić, Josip ; Lanc, Domagoj ; Kršćanski, Sanjin ; Vukelić, Goran

Proceedings of the 6th International Conference of Daaam Baltic Industrial Engineering - 419-423

2008.

Behavior comparison of stainless steel and tool steel materials at elevated temperatures

Brnić, Josip ; Čanađija, Marko ; Turkalj, Goran ; Lanc, Domagoj ; Vukelić, Goran ; Brčić, Marino ; Kršćanski, Sanjin ; Pešić, Igor

Proceedings of the 6th International Conference of Daaam Baltic Industrial Engineering - 425-429

2008.

Response of AISI 304 steel subjected to uniaxial stress at elevated temperatures

Brnić, Josip ; Čanađija, Marko ; Turkalj, Goran ; Lanc, Domagoj ; Kršćanski, Sanjin

Transactions of FAMENA - 32 3-10

Q4 WOS WOS

Znanstvene knjige

2015.

Comparison of Some Structural and Stainless Steels Based on the Mechanical Properties and Resistance to Creep

Brnić, Josip; Vukelić, Goran; Kršćanski, Sanjin

Springer

Kongresna priopćenja

2019

Behaviour of axially loaded FG column in creep regime

Lanc, Domagoj; Turkalj, Goran; Kršćanski, Sanjin;

2018

Creep buckling analysis of the functionally graded beam

Lanc, Domagoj; Kršćanski, Sanjin; Turkalj, Goran;

09.07.2014.

Assessment of lifetime of the structural element based on known experimental data on the properties of material

Kršćanski, Sanjin ; Brnić, Josip ; Vukelić, Goran

usmeno izlaganje

6th International Conference on Engineering Failure Analysis (ICEFA VI) Lisabon, Portugal

13.09.2008.

Disipacijski modeli u plastičnosti

Čanađija, Marko ; Brnić, Josip ; Brčić, Marino ; Vukelić, Goran ; Kršćanski, Sanjin

Susret Hrvatskoga društva za mehaniku (2 : 2008) Split, Hrvatska

Projekti

Znanstveni projekti

2019. - 2023.

Procjena granične nosivosti inženjerskih konstrukcija

suradnik

HRZZ

2019. - 2021.

Konačnoelementni modeli za analizu nelinearnog odziva tankostjenih grednih konstrukcija

suradnik

Sveučilište u Rijeci

2014. - 2018.

Procjena ponašanja konstrukcija u graničnim uvjetima rada

suradnik

HRZZ

2014. - 2016.

Razvoj numeričkih modela za analizu stabilnosti deformacijskih formi grednih konstrukcija

suradnik

Sveučilište u Rijeci

2014. - 2015.

Metal Influence of Heat Affected Zone of electron beam welded steel casting GX4CrNi13-4 on the fatigue strength

suradnik

Bilateralni sporazum (Austrija-Hrvatska)

2014. - 2015.

Material properties, creep behavior, fracture toughness and microstructure of metal alloys -experimental investigations and numerical simulations

suradnik

Bilateralni sporazum (Kina-Hrvatska)

2009. - 2011.

Metal alloys behaviour at different enviromental conditions: testing and numerical simulations

suradnik

Bilateralni sporazum (Kina-Hrvatska)

2007. - 2013.

Numerička analiza odziva konstrukcija za određena područja eksploatacije

suradnik

MOZŠ

Projekti u znanosti - Suradnik na projektu

UNIRI PROJEKTI 2018
Potpore 2014/2016