Doc. dr. sc. Dario Iljkić dipl. ing.

Tehnički fakultet Zavod za materijale

prostorija : 2-164
e-pošta : darioi@riteh.hr
mobitel : +385 95 9117615



MEĐUNARODNA VIDLJIVOST:
CITATIH-INDEXI10-INDEX
Google Scholar 168 7 5
ORCID
ResearcherID

Obrazovanje

1.1.2005. - 12.5.2011. Doktor znanosti Poslijediplomski doktorski studij, modul Proizvodno strojarstvo Sveučilište u Rijeci - Tehnički fakultet
1.1.1996. - 1.1.2004. Diplomirani inženjer strojarstva Sveučilišni dodiplomski studij strojarstva Sveučilište u Rijeci - Tehnički fakultet
1.1.1992. - 1.1.1996. Grafički tehničar za tisak Grafičke tehnologije Kemijsko-tehnološka škola Rijeka

Radno iskustvo

- Znanstveni novak-asistent Znanstveno istraživački i stručni rad; Visoko obrazovanje Sveučilište u Rijeci, Tehnički fakultet
- Znanstveni novak-viši asistent Znanstveno istraživački i stručni rad; Visoko obrazovanje Sveučilište u Rijeci, Tehnički fakultet
- Docent Znanstveno istraživački i stručni rad; Visoko obrazovanje Sveučilište u Rijeci, Tehnički fakultet

Članstva

1.1.2011. - Hrvatsko društvo za toplinsku obradu i inženjerstvo površina
1.1.2007. - Tehnički odbor za ljevarstvo pri Hrvatskom zavodu za normizaciju

Nastavna djelatnost

Kolegiji

1.1.2011. - Materijali II
Preddiplomski sveučilišni studiji strojarstva i brodogradnje
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2011. - Postupci toplinske obrade
Preddiplomski sveučilišni studiji strojarstva, brodogradnje, elektrotehnike i računarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2011. - Izborni projekt - Materijali II
Preddiplomski sveučilišni studij strojarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2011. - Ispitivanje materijala
Diplomski sveučilišni studij strojarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2011. - Metalni materijali
Diplomski sveučilišni studij strojarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2011. - Toplinska obrada metala i inženjerstvo površina
Diplomski sveučilišni studij strojarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2011. - Izborni projekt - Toplinska obrada metala i inženjerstvo površina
Diplomski sveučilišni studij strojarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2011. - Karakterizacija materijala
Diplomski sveučilišni studij strojarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2011. - Tehnologija materijala
Preddiplomski sveučilišni studiji elektrotehnike i računarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2011. - Ljevarstvo
Diplomski sveučilišni studij strojarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2011. - Materijali
Preddiplomski stručni studiji strojarstva i brodogradnje
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2011. - Tehnologija obrade I
Preddiplomski stručni studij strojarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2011. - Materijali i tehnološki postupci
Preddiplomski stručni studij elektrotehnike
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2010. - Materijali i tehnološki postupci
Preddiplomski stručni studij elektrotehnike
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2009. - Materijali II
Preddiplomski sveučilišni studiji strojarstva i brodogradnje
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2009. - Tehnologija materijala
Preddiplomski sveučilišni studiji elektrotehnike i računarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2009. - Materijali
Preddiplomski stručni studiji strojarstva i brodogradnje
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2008. - Tehnologija materijala
Preddiplomski sveučilišni studij elektrotehnike
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2008. - Ljevarstvo
Diplomski sveučilišni studij strojarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2008. - Materijali i tehnološki postupci
Preddiplomski stručni studij elektrotehnike
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2007. - Ljevarstvo
Sveučilišni dodiplomski studij strojarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2007. - Tehnologija obrade I
Preddiplomski stručni studij strojarstva
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2006. - Materijali II
Preddiplomski sveučilišni studiji strojarstva i brodogradnje
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2005. - Tehnologija materijala
Sveučilišni dodiplomski studij elektrotehnike
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:
1.1.2005. - Materijali i tehnološki postupci
Stručni studij elektrotehnike
Sveučilište u Rijeci - Tehnički fakultet
suradnik
Norma sati:

Znanstvena i umjetnička djelatnost

Znanstveni radovi

1. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Jokić, Milenko ; Štic, Lovro ; Borić, Andrej
Mathematical Modeling and Computer Simulation of Steel Quenching
Materials Performance and Characterization 7 --- - 2018.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=958577

2. Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Štic, Lovro; Borić, Andrej; Jokić, Milenko; Senčič, Bojan; Vertnik, Robert
Mathematical modelling of controlled cooling and properties of hot rolled steel
IOP Conference Series: Materials Science and Engineering - 2018.

3. Iljkić, Dario ; Gržinić, Luciano ; Vratović, Goran
Aktivacija austenitnog nehrđajućeg čelika za postupak bestrujnoga nanošenja Ni-P prevlake
--- - 2018.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=958607

4. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Jokić, Milenko
Numerical modelling of welding of martensitic steel
--- - 2018.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=958584

5. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Gržinić, Luciano ; Jokić, Milenko ; Štic, Lovro
An Application of Jominy test results in Computer Simulation of Steel Quenching
--- - 2018.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=952432

6. Smoljan, Božo ; Iljkić, Dario ; Štic, Lovro ; Smokvina Hanza, Sunčana ; Gržinić, Luciano ; Vratović, Goran
Numerical modelling of welded joints properties
--- - 2018.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=952429

7. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Jokić, Milenko ; Štic, Lovro
Computer simulation of mechanical properties and distortions during the quenching of steel
--- - 2018.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=952423

8. Iljkić, Dario ; Smoljan, Božo ; Maretić, Mauro ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Vratović, Goran
An activation of electroless process of ni-p depositing on austenitic stainless steel
--- - 2018.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=952270

9. Maretić, Mauro ; Smoljan, Božo ; Iljkić, Dario
Heat treatment of electroless Ni-P layers on an austenitic stainless-steel substrate
Materiali in tehnologije 51 413-417 - 2017.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=882336

WOS

10. Smoljan, Božo ; Iljkić, Dario ; Štic, Lovro ; Kolumbić, Zvonimir
Mathematical modelling of steel quenching
Materials Science Forum 879 1813-1818 - 2017.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=870448

11. Smoljan, Božo ; Iljkić, Dario ; Maretić, Mauro
Computer simulation of hardness and microstructure of casted steel 100Cr6
Archives of Materials Science and Engineering 78 23-28 - 2016.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=853387

12. Smoljan, Božo ; Iljkić, Dario ; Maretić, Mauro
Adhesivity of electroless Ni-P layer on austenitic stainless steel
Archives of Materials Science and Engineering 80 53-58 - 2016.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=877499

13. Iljkić, Dario ; Smoljan, Božo ; Liverić, Lovro ; Štic, Lovro
Računalna simulacija mehaničkih svojstava kaljenog i popuštenog trna za štancanje
81-88 - 2015.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=767295

14. Smoljan, Božo ; Iljkić, Dario ; Kolumbić, Zvonimir
Computer modelling of as-quenched hardness and microstructure composition of steel
International Journal of Microstructure and Materials Properties 10 86-100 - 2015.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=756791

15. Smoljan, Božo ; Iljkić, Dario ; Tomašić, Neven
Mathematical modelling of hardness of quenched and tempered steel
Archives of Materials Science and Engineering 74 85-93 - 2015.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=796935

16. Smoljan, Božo ; Iljkić, Dario ; Totten, George E.
Mathematical Modeling and Simulation of Hardness of Quenched and Tempered Steel
Metallurgical and Materials Transactions B 46 2666-2673 - 2015.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=796876

WOS

17. Smoljan, Božo ; Iljkić, Dario ; Tomašić, Neven
Prediction of Mechanical Properties and Microstructure Composition of Quenched and Tempered Steel
266-273 - 2015.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=796881

18. Smoljan, Božo ; Iljkić, Dario ; Tomašić, Neven
Computer simulation of microstructure of quenched moulding die
Archives of Materials Science and Engineering 68 81-86 - 2014.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=756328

19. Iljkić, Dario; Smoljan, Božo; Novak, Hrvoje;
An analysis of thermal properties of steel during the quenching
3th International Conference on Mechanical Technologies and Structural Materials, MTSM 2013 - 2013.

20. Smoljan, Božo; Iljkić, Dario; Pomenić, Loreta;
Input physical properties in mathematical model of steel quenching
Journal of achievements in materials and manufacturing engineering 58 81-86 - 2013.

21. Smoljan, Božo; Iljkić, Dario; Pomenić, Loreta;
Prediction of quenched and tempered cast steel properties
13th INTERNATIONAL FOUNDRYMEN CONFERENCE-Innovative Foundry Processes and Materials - 2013.

22. Smoljan, Božo; Iljkić, Dario; Novak, Hrvoje;
Estimation of coefficient of heat conductivity and heat transfer coefficient in the numerical model of the steel quenching
2nd Mediterranean Conference on Heat Treatment and Surface Engineering - 2013.

23. Smoljan, Božo; Iljkić, Dario; Pomenić, Loreta;
Mathematical modelling and computer simulation of mechanical properties of quenched and tempered steel
International Journal of Microstructure and Materials Properties 8 97-112 - 2013.

24. Smoljan, Božo; Iljkić, Dario; Traven, Furio;
Mathematical modelling of mechanical properties of quenched and tempered steel
International Heat Treatment & Surface Engineering 7 16-22 - 2013.

25. Smoljan, Božo; Iljkić, Dario;
Računalna simulacija poboljšanja čeličnog lijeva EN GS-42CrMo4
International Conference on Heat Treatment and Surface Engineering–European Opportunities for Croatian Economy - 2012.

26. Smoljan, Božo; Iljkić, Dario; Traven, Furio;
Mathematical Modeling of Mechanical Properties of Quenched and Tempered Steel Components
1st International Conference on Energy and the Future of Heat Treatment and Surface Engineering - 2012.

27. Smoljan, Božo; Iljkić, Dario;
Simulation of quenched and tempered steel behavior
20th Congress IFHTSE - 2012.

28. Smoljan, Božo; Iljkić, Dario;
Computer Simulation of Quenching and Tempering of Cast Steel
6th International Conference on Quenching and Control of Distortion - 2012.

29. Smoljan, Božo; Iljkić, Dario; Novak, Hrvoje;
Computer simulation of quenched and tempered steel properties
Journal of Achievements in Materials and Manufacturing Engineering 46 175-181 - 2011.

30. Smoljan, Božo; Iljkić, Dario; Traven, Furio;
Predictions of mechanical properties of quenched and tempered steel
Strojniški vestnik-Journal of Mechanical Engineering 56 115-120 - 2011.

31. Smoljan, Božo; Iljkić, Dario; Maretić, Mauro;
Mathematical Modelling of Heat Treatment of Steel
International Scientific and Technical Conference - 2011.

32. Smoljan, Božo; Iljkić, Dario; Novak, Hrvoje;
Prediction of Mechanical Properties Distribution in Quenched and Tempered Steel Specimen
2nd International Conference Mechanical Technologies And Structural Materials - 2011.

33. Smoljan, Božo; Iljkić, Dario; Traven, Furio;
Fracture of Jaw Arm Made of Cast Steel GS-42CrMo4
Strojarstvo 53 307-310 - 2011.

34. Smoljan, Božo; Iljkić, Dario;
Prediction of mechanical properties of quenched and tempered steel and cast steel
19th Congress IFHTSE - 2011.

35. Smoljan, Božo; Iljkić, Dario; Novak, H;
Prediction of quenched and tempered steel and cast steel properties
Journal of Achievements in Materials and Manufacturing Engineering 49 369-374 - 2011.

36. Smoljan, Božo; Iljkić, Dario; Tomašić, Neven;
Computer simulation of mechanical properties of quenched and tempered steel specimen
Journal of achievements in materials and manufacturing engineering 40 155-159 - 2010.

37. Smoljan, Božo; Iljkić, Dario; Traven, Furio; Mrša, Josipa;
Mathematical modelling and computer simulation of fatigue properties of quenched and tempered steel
18th Congress IFHTSE - 2010.

38. Smoljan, Božo; Iljkić, Dario; Tomašić, Neven;
Fracture of steel casting
Proceedings of the International Scientific and Technical Conference “Modern Aspects of Physical Metallurgy and Heat Treatment of Metals 9-10 - 2010.

39. Smoljan, Božo; Smokvina Hanza, Sunčana; Iljkić, Dario;
Computer simulation of quenched steel working stress
izlazi u samo elektroničkom izdanju: DA - 2010.

40. Smoljan, Božo; Iljkić, Dario; Traven, Furio;
Mathematical Modelling and Computer Simulation of Quenched and Tempered Steel Properties
15th International Metallurgy & Materials Congress - 2010.

41. Smoljan, Božo; Iljkić, Dario; Tomašić, Neven;
Svojstva čeličnog lijeva GS-42 CrMo 4
Casting Production-Progress through Knowledge, Quality and Environmental Protection - 2010.

42. Smoljan, Božo; Iljkić, Dario; Traven, Furio;
An Application of Computer Simulation in Optimization of Quenching and Tempering of Steel Workpiece
Proceedings of ICAM2010 - 2010.

43. Smoljan, Božo; Iljkić, Dario;
Simulation of mechanical properties of forged and casted steel 42CrMo4 specimen
Journal of Achievements in Materials and Manufacturing Engineering 43 597-602 - 2010.

44. Smoljan, Božo; Iljkić, Dario; Hanza, S Smokvina;
Computer simulation of working stress of heat treated steel specimen
Journal of Achievements in Materials and Manufacturing Engineering 34 152-156 - 2009.

45. Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Traven, Furio;
An analysis of modified Jominy-test (JMC®-test)
Archives of Computational Materials Science and Surface Engineering 1 120-124 - 2009.

46. Smoljan, Božo; Hanza, S Smokvina; Iljkić, Dario; Totten, GE; Felde, Imre;
Computer Simulations of Mechanical Properties of Steel Dies
Materials and manufacturing processes 24 714-717 - 2009.

47. Smoljan, Božo; Iljkić, Dario; Traven, Furio;
Computer simulation of mechanical properties of quenched and tempered steel shaft
1st Mediterranean Conference on Heat Treatment and Surface Engineering - 2009.

48. Smoljan, Božo; Iljkić, Dario; Traven, Furio;
Computer simulation of mechanical properties of quenched and tempered steel
Konferenca o materialih in tehnologijah (17; 2009) - 2009.

49. Smoljan, Božo; Iljkić, Dario; Traven, Furio;
Računalna simulacija kaljenja i popuštanja čelične osovine
MATRIB 2009 - 2009.

50. Smoljan, Božo; Iljkić, Dario;
Microstructure and mechanical properties of steel castings
Proceedings Book of the 8th International Foundrymen Conference/Unkić, Faruk (ur.).-Sisak: Faculty of Metallurgy, University of Zagreb - 2008.

51. Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Mrša, Josipa; Felde, Imre;
Prediction of Working Stress of Quenched and Tempered Steel
17th Congress IFHTSE - 2008.

52. Smoljan, Božo; Hanza, S Smokvina; Iljkic, D; Totten, GE; Felde, Imre;
Computer simulation of mechanical properties of steel dies
MATERIALI IN TEHNOLOGIJE 42 154 - 2008.

53. Smoljan, Božo; Smokvina Hanza, Sunčana; Iljkić, Dario;
Prediction of working stress of cold-work tool steel
International Conference MATRIB 2008 - 2008.

54. Smoljan, Božo; Hanza, S Smokvina; Tomašić, Neven; Iljkić, Dario;
Computer simulation of microstructure transformation in heat treatment processes
Journal of Achievements in Materials and Manufacturing Engineering 24 275-282 - 2007.

55. Smoljan, Božo; Smokvina Hanza, Sunčana; Tomašić, Neven; Iljkić, Dario;
Računalna simulacija strukturnih pretvorbi u čeliku pri toplinskoj obradi primjenom TTT dijagrama
MATRIB 2007: Materials, tribology, processing - 2007.

56. Totten, GE; Réti, Tamás; Felde, Imre; Smoljan, B; Iljkic, Dario; Tomasic, N;
Evaluation of Steel Hardenability by JM®-test
Materials science forum 537 607-614 - 2007.

57. Smoljan, Božo; Rubesa, D; Tomasic, N; Smokvina Hanza, Sunčana;
An analysis of application of modified Jominy-test in simulation of cold work tool steels quenching
International Journal of Microstructure and Materials Properties 2 24-34 - 2007.

58. Smoljan, Božo; Smokvina Hanza, Sunčana; Tomašić, Neven; Iljkić, Dario;
Achievements of Mathematical Modelling of Austenite Decomposition during the Heat Treatment Processes
16th International Federation for Heat Treatment and Surface Engineering (IFHTSE) Congress - 2007.

59. Smoljan, Božo; Tomašić, Neven; Iljkić, Dario; Felde, Imre; Reti, Tamas;
Application of JM®-test in 3D Simulation of Quenching
Journal of Achievements in Materials and Manufacturing Engineering 17 281-284 - 2006.

60. Smoljan, Božo; Tomašić, Neven; Iljkić, Dario; Felde, Imre; Reti, Tamas;
3D simulation of quenching of steel specimen
3rd International Conference on Thermal Process Modelling and Simulation - 2006.

61. Smoljan, Božo; Iljkić, Dario; Totten, George; Felde, Imre;
An Application of JM®-test in Computer Simulation of Quenching of Cold Work Tool Steels
7th International Tooling Conference - 2006.

62. Smoljan, Božo; Iljkić, Dario; Totten, George; Felde, Imre;
Simulation of Hardness Distribution in Quenched Drawing Punch
MATRIB 2006 - 2006.

63. Smokvina Hanza, Sunčana; Iljkić, Dario; Tomašić, Neven;
Modelling of Microstructure Transformation During the Steel Quenching
4th International PhD Conference on Mechanical Engineering, PhD2006 - 2006.

64. Smoljan, Božo; Iljkic, D; Tomasic, N; Totten, GE;
An application of JM®-specimen in prediction of steel quenching results
The 11th International Scientific Conference CAM3S - 2005.

65. Smoljan, Božo; Rubeša, Domagoj; Tomašić, Neven; Smokvina Hanza, Sunčana; Iljkić, Dario;
An application of modified Jominy-test in computer simulation of quenching of cold work tool steels
1st International Conference on Heat Treatment and Surface Engineering of Tools and Dies - 2005.

66. Smoljan, Božo ; Iljkić, Dario ; Maretić, Mauro ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Borić, Andrej
An analysis of properties of electroless Ni-P layer on stainless steel

Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=882331

67. Smoljan, Božo ; Iljkić, Dario ; Pomenić, Loreta ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Borić, Andrej
Computer simulation of steel casting
83-88
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=882286

68. Smoljan, Božo ; Iljkić, Dario ; Štic, Lovro
Mathematical Modeling and Computer Simulation of Non-monotonic Quenching
-
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=822068

69. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana
Computer simulation of mechanical properties of quenched and tempered stamping punch
-
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=767298

70. Smoljan, Božo ; Iljkić, Dario ; Pomenić, Loreta
Mathematical modelling and computer simulation of steel quenching
-
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=767299

71. Smoljan, Božo ; Iljkić, Dario ; Štic, Lovro ; Rubeša, Domagoj
Matematičko modeliranje i računalna simulacija tvrdoće nakon poboljšanja
-
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=780648

72. Smoljan, Božo ; Iljkić, Dario ; Salopek, Goran
Prediction of Load Capacity of Quenched and Tempered Steel Specimen
-
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=796944

73. Smoljan, Božo ; Iljkić, Dario ; Štic, Lovro ; Rubeša, Domagoj
Numerical Modelling of Steel Carburizing
-
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=840984

74. Smoljan, Božo ; Iljkić, Dario ; Štic, Lovro ; Pomenić, Loreta ; Smokvina Hanza, Sunčana
Numerical modelling of case hardening of steel
127-135
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=840982

75. Smoljan, Božo ; Iljkić, Dario ; Rubeša, Domagoj ; Štic, Lovro ; Maretić, Mauro
Mathematical Modelling and Computer Simulation of Steel Quenching
439-442
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=840976

76. Smoljan, Božo ; Iljkić, Dario ; Štic, Lovro
Computer modelling of quenching of steel die for industrial purpose
-
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=822108

77. Smoljan, Božo ; Iljkić, Dario ; Štic, Lovro ; Tomašić, Neven ; Smokvina Hanza, Sunčana
Mathematical modelling of mechanical properties and microstructure of welded joint
-
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=822107

78. Smoljan, Božo ; Iljkić, Dario ; Štic, Lovro ; Kolumbić, Zvonimir
Mathematical modelling of steel quenching

Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=822106

79. Smoljan, Božo ; Iljkić, Dario ; Štic, Lovro ; Smokvina Hanza, Sunčana
Numerical modelling of steel quenching

Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=822104

80. Iljkić, Dario ; Smoljan, Božo ; Pomenić, Loreta ; Štic, Lovro
Optimiziranje termalnih procesa i korozijske otpornosti metalnih materijala
-
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=822101

81. Smoljan, Božo ; Iljkić, Dario ; Senčič, Bojan ; Vertnik, Robert
Numerical model of controlled cooling of steel hot rolled bars
---
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=911740

82. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Borić, Andrej ; Rubeša, Domagoj
Prediction of steel properties during controlled cooling of hot rolled steel
1-8
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=911714

83. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Borić, Andrej ; Senčič, Bojan ; Vertnik, Robert
Numeričko modeliranje i simulacija kontroliranog ohlađivanja toplo valjanog čelika
133-140
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=911709

84. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Borić, Andrej ; Senčič, Bojan ; Vertnik, Robert
Numerical model and computer simulation of controlled cooling of hot rolled steel bars
-
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=890499

85. Smoljan, Božo ; Iljkić, Dario ; Štic, Lovro ; Smokvina Hanza, Sunčana ; Borić, Andrej ; Tomašić, Neven
Numerical modelling of heat treated welded joint

Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=882339

86. Smoljan, Božo ; Iljkić, Dario ; Pomenić, Loreta ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Borić, Andrej
Computer simulation of steel casting
-
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=882286

87. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Borić, Andrej ; Jokić, Milenko ; Senčič, Bojan ; Vertnik, Robert
Mathematical modelling of controlled cooling and properties of hot rolled steel
---
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=952380

Znanstvene knjige

1. Urednik knjige
Božo Smoljan; Dario Iljkić
Proceedings of the International Conference on Heat Treatment and Surface Engineering – European Opportunities for Croatian Economy
Hrvatsko društvo za toplinsku obradu i inženjerstvo površina Rijeka - 2012.

Pozvana predavanja

1. Smoljan, Božo ; Iljkić, Dario
Development of computer modelling of steel quenching for industrial purpose
Ljubljana, Slovenija
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=702855
2. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Gržinić, Luciano ; Vratović, Goran
Computer simulation of controlled cooling of continues casted and rolled steel bar
Opatija, Hrvatska
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=952268
3. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Gržinić, Luciano ; Vratović, Goran
Computer simulation of controlled cooling of continues casted and rolled steel bar
Opatija, Hrvatska
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=952268
4. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Gržinić, Luciano ; Vratović, Goran
Computer simulation of controlled cooling of continues casted and rolled steel bar
Opatija, Hrvatska
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=952268
5. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Borić, Andrej
Computer simulation of cast steel properties
Opatija, Hrvatska
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=882283
6. Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana
Computer modelling of mechanical properties and microsructure of quenched moulding die
Opatija, Hrvatska
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=702863
7. Smoljan, Božo ; Iljkić, Dario ; Štic, Lovro
Computer simulation of microstructure and mechanical properties of cast steel
Opatija, Hrvatska
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=822102
8. Smoljan, Božo ; Iljkić, Dario ; Štic, Lovro
Computer simulation of microstructure and mechanical properties of cast steel
Opatija, Hrvatska
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=822102
9. Smoljan, Božo ; Iljkić, Dario ; Tomašić, Neven
Mathematical modelling of hardness of quenched and tempered steel
Gliwice-Zakopane, Poljska
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=796885
10. Smoljan, Božo ; Iljkić, Dario ; Tomašić, Neven
Mathematical modelling of hardness of quenched and tempered steel
Gliwice-Zakopane, Poljska
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=796885
11. Smoljan, Božo; Iljkić, Dario; Pomenić, Loreta
Prediction of quenched and tempered cast steel properties
12. Smoljan, Božo; Iljkić, Dario; Novak, Hrvoje
Prediction of quenched and tempered steel and cast steel properties
13. Smoljan, Božo; Iljkić, Dario
Simulation of mechanical properties of forged and casted steel 42CrMo4 specimen
14. Smoljan, Božo; Iljkić, Dario; Tomašić, Neven
Computer simulation of mechanical properties of quenched and tempered steel specimen
15. Smoljan, Božo; Iljkić, Dario; Traven, Furio
An Application of Computer Simulation in Optimization of Quenching and Tempering of Steel Workpiece
16. Smoljan, Božo; Iljkić, Dario; Pomenić, Loreta
Input physical properties in mathematical model of steel quenching
17. Smoljan, Božo; Iljkić, Dario; Pomenić, Loreta
Računalna simulacija poboljšanja čeličnog lijeva EN GS-42CrMo4( Computer simulation of quenching and tempering of cast steel EN GS-42CrMo4 )
18. Smoljan, Božo; Iljkić, Dario; Novak, Hrvoje
Computer simulation of quenched and tempered steel properties
19. Smoljan, Božo; Tomašić, Neven; Iljkić, Dario; Felde, Imre; Reti, Tamas
Application of JM® -test in 3D Simulation of Quenching
20. Smoljan, Božo; Iljkić, Dario; Traven, Furio
Computer simulation of mechanical properties of quenched and tempered steel shaft
21. Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana, Traven, Furio
An Analysis of Modified Jominy-test (JMC®-test)
22. Smoljan, Božo; Smokvina Hanza, Sunčana; Tomašić, Neven; Iljkić, Dario
Computer simulation of microstructure transformation in heat treatment processes
23. Smoljan, Božo; Smokvina Hanza, Sunčana; Tomašić, Neven; Iljkić, Dario
Achievements of Mathematical Modelling of Austenite Decomposition during the Heat Treatment Processes
24. Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana
Computer simulation of working stress of heat treated steel specimen
25. Smoljan, Božo; Iljkić, Dario; Traven, Furio
Computer simulation of mechanical properties of quenched and tempered steel
26. Smoljan, Božo; Iljkić, Dario; Tomašić, Neven; Totten, George
An Application of JM® -specimen in Prediction of Steel Quenching Results
27. Smoljan, Božo; Iljkić, Dario
Development of computer modelling of steel quenching for industrial purpose

Kongresna priopćenja

1.
Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Borić, Andrej
Mathematical modeling of thermal processing of metal alloys Pozvano The Silver Jubilee International Scientific Conference on "Achievements in Mechanical and Materials Engineering" AMME`2017 Wisla, Poljska - 25.10.2017.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=911727
2.
Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Borić, Andrej ; Rubeša, Domagoj
Numerical modeling and simulation of case hardening of steel Predavanje 5th International Conference on Modern Manufacturing Technologies in Industrial Engineering, ModTech 2017 Sibiu, Rumunjska - 17.6.2017.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=882338
3.
Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Borić, Andrej ; Rubeša, Domagoj ; Novak, Hrvoje
An application of Jominy test results in computer simulations of steel quenching Predavanje 10th International Conference on Industrial Tools and Advanced Processing Technologies, ICIT&APT 2017 Ljubljana, Slovenija - 26.4.2017.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=882272
4.
Smoljan, Božo ; Iljkić, Dario ; Tomašić, Neven
Mathematical modelling of hardness of quenched and tempered steel Plenarno 22th Winter International Scientific Conference on "Achievements in Mechanical and Materials Engineering" Winter-AMME`2015 Gliwice-Zakopane, Poljska - 1.1.2015.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=796885
5.
Smoljan, Božo ; Iljkić, Dario ; Tomašić, Neven
Computer simulation of microstructure of quenched moulding die Predavanje 15th International Materials Symposium (IMSP’2014) Denizli, Turska - 1.1.2014.
Preuzeto sa: https://bib.irb.hr/prikazi-rad?&rad=738152
6.
Smoljan, Božo; Iljkić, Dario
Simulation of quenched and tempered steel behavior
7.
Iljkić, Dario; Smoljan, Božo; Novak, Hrvoje
An analysis of thermal properties of steel during the quenching
8.
Smoljan, Božo; Iljkić, Dario; Novak, Hrvoje
Estimation of coefficient of heat conductivity and heat transfer coefficient in the numerical model of the steel quenching
9.
Smoljan, Božo; Iljkić, Dario; Maretić, Mauro
Mathematical Modelling of Heat Treatment of Steel
10.
Smoljan, Božo; Iljkić, Dario
Prediction of mechanical properties of quenched and tempered steel and cast steel
11.
Smoljan, Božo; Iljkić, Dario; Novak, Hrvoje
Prediction of Mechanical Properties Distribution in Quenched and Tempered Steel Specimen
12.
Smoljan, Božo; Iljkić, Dario
Computer Simulation of Quenching and Tempering of Cast Steel
13.
Smoljan, Božo; Iljkić, Dario, Traven, Furio
Mathematical Modeling of Mechanical Properties of Quenched and Tempered Steel Components
14.
Smoljan, Božo; Iljkić, Dario
Mathematical modelling and computer simulation of mechanical properties of quenched and tempered steel
15.
Smoljan, Božo; Iljkić, Dario; Maretić, Mauro
Prediction of Mechanical Properties of Quenched and Tempered Steel Die
16.
Smoljan, Božo; Iljkić, Dario; Tomašić, Neven; Traven, Furio
Fracture of Jaw Arm Made of Cast Steel GS-42CrMo4
17.
Smoljan, Božo; Iljkić, Dario; Traven, Furio
Mathematical Modelling and Computer Simulation of Quenched and Tempered Steel Properties
18.
Smoljan, Božo; Iljkić, Dario; Tomašić, Neven
Fracture of steel casting
19.
Smoljan, Božo; Iljkić, Dario; Traven, Furio; Mrša, Josipa
Mathematical modelling and computer simulation of fatigue properties of quenched and tempered steel
20.
Smoljan, Božo; Iljkić, Dario; Tomašić, Neven
Svojstva čeličnog lijeva GS-42 CrMo 4( Properties of cast steel GS-42 CrMo 4 )
21.
Smoljan, Božo; Iljkić, Dario; Traven, Furio
Računalna simulacija kaljenja i popuštanja čelične osovine
22.
Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Mrša, Josipa; Felde, Imre
Prediction of Working Stress of Quenched and Tempered Steel
23.
Smoljan, Božo; Smokvina Hanza, Sunčana; Iljkić, Dario; Totten, G.E.; Felde, Imre
Computer simulation of mechanical properties of steel dies
24.
Smoljan, Božo; Smokvina Hanza, Sunčana; Tomašić, Neven; Iljkić, Dario
Računalna simulacija strukturnih pretvorbi u čeliku pri toplinskoj obradi primjenom TTT dijagrama( Computer simulation of microstructure transformation in heat treatment processes using TTT diagrams )
25.
Smoljan, Božo; Iljkić, Dario; Totten, George; Felde, Imre
Simulation of Hardness Distribution in Quenched Drawing Punch
26.
Smoljan, Božo; Iljkić, Dario; Tomašić, Neven; Felde, Imre; Totten, George; Reti, Tamas
Evaluation of Steel Hardenability by JM® -test
27.
Smoljan, Božo; Iljkić, Dario
Microstructure and mechanical properties of steel castings
28.
Smoljan, Božo; Smokvina Hanza, Sunčana; Iljkić, Dario
Prediction of working stress of cold-work tool steel
29.
Smoljan, Božo, Robert, Maria, Helena; Iljkić, Dario
Semisolid Processing of Cast Iron
30.
Smoljan, Božo; Tomašić, Neven; Iljkić, Dario; Felde, Imre; Reti, Tamas
3D Simulation of Quenching of Steel Specimen
31.
Smokvina Hanza, Sunčana; Iljkić, Dario; Tomašić, Neven
Modelling of Microstructure Transformation During the Steel Quenching
32.
Smoljan, Božo; Iljkić, Dario; Totten, George; Felde, Imre
An Application of JM® -test in Computer Simulation of Quenching of Cold Work Tool Steels
33.
Smoljan, Božo; Robert, Maria, Helena; Iljkić, Dario
Legure za oblikovanje u poluskrućenom stanju( Semi-solid metal alloys )
34.
Smoljan, Božo; Rubeša, Domagoj; Tomašić, Neven; Smokvina Hanza, Sunčana; Iljkić, Dario
An application of modified Jominy-test in computer simulation of quenching of cold work tool steels
35.
Pomenić, Loreta; Iljkić, Dario; Tomić, Martina
Korozijska svojstva poboljšanog čelika i čeličnog lijeva( Corrosion properties of quenched and tempered steel and cast steel )
36.
Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana
Computer modelling of mechanical properties and microsructure of quenched moulding die
37.
Smoljan, Božo; Iljkić, Dario
Computer modeling of mechanical properties and microsructure of quenched steel specimen

Znanstveni projekti

1. 1.1.2013. - 1.1.2015.
ARISE – Advanced Research, Innovation and technology transfer in Surface Engineering; Istraživač; EC Fund for investment in science and innovation; 657.775,75 EUR;
2. 1.1.2008. - 1.1.2009.
Model-based optimization of immersion quenching operations; Suradnik; Međunarodni hrvatsko-mađarski znanstveni projekt; ;
3. 1.1.2007. - 1.1.2008.
Mathematical modelling of thermal processes; Suradnik; Međunarodni hrvatsko-slovenski znanstveni projekt; ;
4. 1.1.2007. -
Optimiranje parametara i predviđanje rezultata toplinske obrade metala; Znanstveni novak; Ministarstvo znanosti, obrazovanja i športa Republike Hrvatske; ;
5. 1.1.2005. - 1.1.2006.
Razvoj materijala i procesa računalnim modeliranjem; Znanstveni novak; Ministarstvo znanosti, obrazovanja i športa Republike Hrvatske; ;

Znanstveni skupovi

1. 1.1.2013. -
2nd Mediterranean Conference on Heat Treatment and Surface Engineering Dubrovnik-Cavtat, Hrvatska Član Programskog odbora
2. 1.1.2013. -
3rd International Conference Mechanical Technologies and Structural Materials – MTSM 2013 Split, Hrvatska Član Organizacijskog odbora
3. 1.1.2012. -
International Conference on Heat Treatment and Surface Engineering – European Opportunities for Croatian Economy Rijeka, Hrvatska Predsjednik Organizacijskog odbora
4. 1.1.2011. -
2nd International Conference Mechanical Technologies and Structural Materials – MTSM 2011 Split, Hrvatska Član Organizacijskog odbora
5. 1.1.2010. -
1st International Conference Mechanical Technologies and Structural Materials – Conference in memoriam of Prof. emeritus Romeo Deželić – MTSM 2010 Split, Hrvatska Član Organizacijskog odbora
6. 1.1.2009. -
International Conference on New Challenges in Heat Treatment and Surface Engineering – Conference in honour of Prof. Božidar Liščić) Dubrovnik-Cavtat, Hrvatska Član Organizacijskog odbora

Uredništva časopisa

1. 1.1.2009. - Ljevarstvo – Journal for Theory and Application in Foundry

Recenzije

1. Ljevarstvo – Journal for Theory and Application in Foundry
2. Metalurgija – Journal for Theory and Application in Metallurgy
3. Engineering Review
4. 12th International Foundrymen Conference – Sustainable Development in Foundry Materials and Technologies
5. Archives of Materials Science and Engineering
6. Journal of Achievements in Materials and Manufacturing Engineering – JAMME
7. 13th International Foundrymen Conference – Innovative Foundry Processes and Materials

Stručna djelatnost

Stručni projekti

1.
1.1.2012. - 1.1.2013.
Kontrolirano hlađenje u procesu valjanja čeličnih profila
Štore Steel d.o.o., Slovenija  
Suradnik
2.
1.1.2006. - 1.1.2009.
Radovi ispitivanja stanja materijala procesne opreme i dokazivanja vrste materijala u Rafineriji nafte Rijeka
STSI – Integrirani tehnički servisi d.o.o.  
Suradnik

Stručna aktivnost

1.
1.1.2011. -
Potvrda o ispravnosti silosa Holcim mineralni agregati d.o.o.
  Suradnik
2.
1.1.2010. -
Ispitivanje uzroka havarije hyper kompresora postrojenja polietilen u Dini u Omišlju
  Suradnik
3.
1.1.2006. -
Ispitivanje uzroka oštećenja cijevi pregrijača pare
  Suradnik
4.
1.1.2005. -
Analiza oštećenja cijevi kondenzatora turbine 341-t21 u energani Rafinerije nafte Rijeka
  Suradnik